Stack Overflow
Stack Overflow

Questions tagged [pymodbus]

Pymodbus is a python implementation of modbus protocol providing both client and slave features.

PYMODBUS is a full modbus implementation of modbus protocol using python. It provides both client and server features and supports Modbus over RTU, ASCII, TCP, UDP protocols. The library also supports both synchronous and asynchronous variants of both client and server features.

Pymodbus is supported on both on python 2.7 and python 3.x

For more info refer

290 questions
1
vote
1 answer

pyModbusTCP can you host multiple servers in the same program with different Slave ID's yet connecting to the same IP address?

So I'm attempting to make some software to replicate Modbus Devices for GUI and systems testing and demos. Issue is I want to run one Device Simulator Python Program on the same machine as it's connecting to so it'll be hosted on Localhost. I want…
mgillard
  • 13
  • 2
1
vote
1 answer

pymodbus serial RTU inter-character timeout and USB

USB is a packet protocol: it buffers bytes, then sends a packet. This is causing me a problem because the software I am using (pymodbus) sees an incomplete Modbus Packet in a complete USB packet, and reports a short-packet error ("No Response…
david
  • 2,435
  • 1
  • 21
  • 33
1
vote
1 answer

Read Data MODBUS over UDP/IP using Python(pymodbus)

There is a device that sends information using the Modbus protocol. I am using the following python code to receive the information of this device : from pymodbus.client.sync import ModbusTcpClient,ModbusUdpClient from pymodbus.transaction import…
hossein ghorbanzadeh
  • 11
  • 2
1
vote
1 answer

from pymodbus.server.asynchronous import StartTcpServer ModuleNotFoundError: No module named 'pymodbus'

I have trying to import pymodbus module for an simulation of oil refinery. but even after install I am getting an error like this: from pymodbus.server.asynchronous import StartTcpServer ModuleNotFoundError: No module named 'pymodbus' I have…
iso42
  • 21
  • 1
  • 7
1
vote
0 answers

pymodbus RTU communication

Implemented below code to communicate python program with Modbus RTU protocol. However trying to read/write data to/from the python program, ModPoll software throws first timeout error & then "Insufficient byte received" Kindly request to suggest…
Sharad Patil
  • 11
  • 1
1
vote
1 answer

create fully customised pymodbus requests

I'm new to pymodbus. I am trying to create a custom request to be sent to a TCP client, this specific request needs to have 3 exclamation marks at the beginning of the message. an example message request would be 21 21 21 01 7F 07 40 01 00 88 00…
Juan Navarro
  • 21
  • 2
1
vote
0 answers

How to suppress Depreciation warnings for pymodbus asyncio

We're using a third party library which still uses the old @asyncio.coroutine decorator and is generating a bunch of warnings on import. I recognise this will break in future versions of python. But for now we just want to turn off this warning so…
Philip Couling
  • 13,581
  • 5
  • 53
  • 85
1
vote
0 answers

How to use a modbus protocol with Django?

I'm using django to develop a monitoring system. This monitoring system uses the Modbus RTU communication protocol. A device can be used to use the inline form, as a device can have multiple records, this device is working properly. What happens is…
lopes
  • 29
  • 3
1
vote
2 answers

Communicate with Elfin EW11 RS485 wifi converter

I am trying to communicate with an electrical meter (Orno WE-517) that has an RS485 modbus interface. This serial interface is connected to an Elfin EW11 modbus to Wifi converter. Using pymodbus, I can connect to the adapter but I don't manage to…
Bwibwi13
  • 11
  • 4
1
vote
0 answers

Troubling with writing data into a holding register using pymodbus

I am troubling with writing into a holding register using pymodbus. I can read the register data using this library (pymodbus). But when I want to write data into a single register, it gives me the output shown in the picture. I have a Modbus…
Atiqur Rahman
  • 59
  • 4
1
vote
1 answer

Power Meter - Modbus RS485 - After 5 to 6 hours, the device doesn't answer anymore

Using a Raspberry PI, I've written a loop in Python reading 6 registers of a Polier MTR5LMOD, every 15 sec, using the waveshare 2-ch rs485 hat. The program works during 5 to 6 hours (sometime less, sometime more)... and suddenly... the device…
Phildeal
  • 26
  • 3
1
vote
0 answers

Is there a way to catch a connection error for PyModbus?

Currently, I'm using pymodbus to read data from a few slave devices. I discovered that even if the connecting fails, the script would still continue regardless instead of just failing. I want it to just fail properly so that I can catch the error…
Amerul Atiq
  • 51
  • 4
1
vote
0 answers

pymodbus how to test my serial RTU server over a real serial port

I try to write a pytest for my pymodbus RTU server where I want to write a 32bit float encoded value to the server and compare it with the servers own register read method. The server looks like this: class ModbusRTUServer: P_target_address =…
JAR
  • 408
  • 4
  • 5
1
vote
1 answer

ConnectionException: Modbus Error: [Connection] Failed to connect ModbusTcpClient

I have been trying to read data from Modbus (Raspberry pi here) over Modbus TCP using pymodbus. I keep on getting the error unable to connect. Here is the code snippet producing this error. from pymodbus.client.sync import ModbusTcpClient #modbus…
Banks
  • 179
  • 13
1
vote
1 answer

Pymodbus reading holding and input registers : IllegalAddress

I am trying with the interactive version of pymodbus (pip install pymodbus[repl]) to access a modbus device (UPS). I had accessed it by using mbpoll tool, so the communication and device are both working. I guess I am having problems to figure out…
Miguel Rozsas
  • 397
  • 2
  • 3
  • 9
1 2 3
…
19 20