Questions tagged [openvpn]

Free software implementing virtual private networks (VPN). **Important:** This tag is exclusively for programming-related questions, NOT for general questions on configuring or using VPNs; questions about general network and server administration should be directed to Server Fault, and questions about general software use should be directed to Super User.

OpenVPN is an open source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. OpenVPN allows peers to authenticate each other using a pre-shared secret key, certificates, or username/password.

In contrast to traditional VPN which uses IPSec/IP protocol (with which many home routers and firewalls have issues), it uses TLS over TCP/IP and UDP/IP protocols.

Read more about OpenVPN at Wikipedia..

954 questions
1
vote
2 answers

Ubuntu 22.04 OpenVpn server error: write to TUN/TAP : Invalid argument (code=22)

I start openvpn server with openvpn --dev tun --ifconfig 172.16.0.1 172.16.0.2 --cipher AES-256-CBC on my Ubuntu 22.04 Linux Box I generate the certificates and keys with easycert and copy everything on a Windows 10 client. The connection doesn't…
Sethi
  • 75
  • 1
  • 5
1
vote
0 answers

How i can connect Openvpn Client by C#

Xingcode have to anti OpenvpnDeamon Is there a way for me to be able to connect directly without going through a third party By Config.ovpn not private account? windowsapplication winform C#
1
vote
1 answer

Is there a way to make AWS VPN client work on Ubuntu 21.10?

I'm using the AWS VPN Client, it was working OK before upgrading to Ubuntu 21.10 (specifically Pop!_OS). When trying to connect using the AWS VPN client I'm getting a peculiar error - it can't open OpenVPN for some reason? Immediately after clicking…
Shay Nehmad
  • 1,103
  • 1
  • 12
  • 25
1
vote
0 answers

How to implement an OpenVPN Client in CoDeSys?

I need to connect my Codesys PLC (RevPi Connect) to a Webserver using an OpenVPN Client. I could, of course, use the underlying Raspberry Pi to install the OpenVPN, but I would prefer to do this directly in CoDeSys. Is there any way to do…
1
vote
0 answers

Google Two-Factor - Authentication Apply Problem

Hello Recently I am struggling with openvpn multi-factor authentication issue. This problem has been confirmed as a problem that occurs in the CentOS6 .10 version, and this problem does not occur in the CentOS5 and 7 versions. For more details, it…
couo10
  • 11
  • 3
1
vote
0 answers

Openvpn Decode/separate the Static Challenge format for use with PAM

I've inherited an application environment in which users are required to authenticate via Tunnelblick from their Macbooks. There is an Ubuntu box that is dedicated to running OpenVPN Server, version: OpenVPN 2.4.4 x86_64-pc-linux-gnu [SSL (OpenSSL)]…
1
vote
0 answers

I am working on a VPN app which used Open VPN and I am not sure how to call the tunnel

I don't understand how does packet tunnel work and also don't understand where use packet tunnel in view controller. My .ovpn file is working fine but not connecting only show the details of my server address. Can any one explain whole process how…
Saurabh Pathak
  • 879
  • 7
  • 10
1
vote
1 answer

openvpn client in docker with centos and mikrotik server

I owned a openvpn server in mikrotik i want to setup open vpn client in docker over centos So that I can access the database on the server centos Please guide me on how to establish a connection between the Docker as an ؤمهثىف To connect to a server…
1
vote
1 answer

Which Linux capability to use to properly run "sysctl -w net.ipv4.conf.tun0.route_localnet=1" in a Docker container?

I'm using an OpenVPN server in a Docker container for multiple client connections. This container is located in a specific Docker network in which I have a web server as client target. I want to publish the host name of my web server to clients so…
jbaptperez
  • 656
  • 6
  • 20
1
vote
2 answers

How to implement auth-user-pass-verify in OpenVPN?

I want to implement username and password authentication for my OpenVPN users. So there will be multiple users, where to store all these usernames and passwords and how to verify them?
Msvstl
  • 1,116
  • 5
  • 21
1
vote
1 answer

Exclude IP from OpenVPN route

I have an OpenVPN server, and would like to make clients route an address range, like 1.2.3.0/24 through VPN. However, I do NOT want to make clients use VPN for a specific IP address on that same range. So the routing table on the clients should…
sfphoton
  • 127
  • 1
  • 7
1
vote
0 answers

How can I use the command line to connect using OpenVPN *CONNECT*

There are lots of examples here about how to use the command line to connect to OpenVPN. I can't find any examples for OpenVPN Connect, which is OpenVPN's proprietary client using their access server. I've tried "C:\Program Files\OpenVPN…
Shawn
  • 3,031
  • 4
  • 26
  • 53
1
vote
0 answers

Call OpenVPN from ci/cd script gitlab

I want to call ssh via GitLab and push changes, I already have a working structure but I want to add my server to VPN server and only accessible from VPN server IP Address Do you have something to add? I have added this - which openvpn || (apt-get…
Vancho
  • 25
  • 7
1
vote
1 answer

Can't connect to openVPN

I can't connect to openVPN. The error from the /var/log/openvpn file is below. I tried several solutions I found on internet forums but I still can't fix this issue. Could you please suggest a solution for this. 322.194.25.95:50805 WARNING: Failed…
kg_p
  • 13
  • 1
  • 3
1
vote
0 answers

TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)

I have recently installed an OpenVPN service on my Google Cloud Platform (Debian 10 Server) in order to test connecting to internet on this VPN protocol. The config file that is created by the server, however, fails to connect to internet when I…