Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [vyatta]

Vyatta is an Open Source routing company

Vyatta is an Open Source routing company. They offer a software license to run on your own hardware or an appliance model.

59 questions
1
vote
3 answers

Can a virtual machine do networking for multiple ESXi servers?

I am currently using Vyatta for routing eth1 on all servers on esx01. Back-ups are done via the internal 192.168.1.0/x network. I am wondering if I can have the guests on other virtual machines also join the network hosted on a different ESXi host.
ujjain
  • 3,983
  • 16
  • 53
  • 91
1
vote
4 answers

Inexpensive and Open replacement for Cisco Tunnel-based EasyVPN with Cisco VPN 3000 Series

I have a scenario where i have to establish peer-to-peer preshared key based VPN to a vendor. This vendor uses Cisco EasyVPN with Cisco VPN 3000 as access concentrator. I check the compatibility of the type of VPN from…
Shoaibi
  • 809
  • 1
  • 10
  • 28
0
votes
1 answer

Convert iptables to Brocade/Vyatta

I would like to switch from iptables to Brocade/Vyatta, but are having trouble with "converting" firewall rules. This is my iptables, which works: # Default policy to drop 'everything' but our output to internet iptables -P FORWARD DROP iptables -P…
Kasper Nielsen
  • 35
  • 1
  • 7
0
votes
1 answer

Dell M620 Xenserver network issue

I've got a really strange problem running Xenserver 7.0 (tried 7.1 as well) on a Dell M620 with BCM57810 network card. The whole setup is fine and running flawlessly with no traffic. I've got a Windows Server 2016 running and can access it with RDC…
Meiko Watu
  • 364
  • 3
  • 15
0
votes
1 answer

VyOS NAT does not work

We are migrating our Internet Gateway from Cisco to a VyOS router. Our ISP gives us a /29 network on VLAN 2715 from their router (A.B.C.114/29 where A.B.C.113 is their router and the gateway for our traffic). We have a Layer 3 switch which does the…
aastefanov
  • 101
  • 4
0
votes
1 answer

IPSec Tunnel VyOS+AWS: Cannot communicate from router to other side

I have a site (192.168.1.0/24) with a VyOS based router connecting to an AWS VPC (10.7.0.0/16) through IPSec tunnel set up with dynamic routing (BGP). The tunnel itself works: The clients on site can ping and access the servers inside the VPC.…
Port Islander
  • 1
0
votes
1 answer

Vyatta Destination NAT not working

We are running into an issue adding new IPs to a vyatta device after exceeding the limit of IPs in our first VRRP group. All of the IPs listed in the vrrp-group 1 work fine but any I add to vrrp-group 2 do not. We can see traffic coming in but…
tweeks200
  • 351
  • 1
  • 3
  • 11
0
votes
1 answer

Force secondary DNS server to resolve unresolved names

Is there a way to setup on Linux (Vyatta in particular) secondary DNS server, which is used only to resolve requests, that were not resolved by primary DNS? If I just set up secondary DNS, it is only used when primary server is down and not if…
tikend
  • 109
  • 5
0
votes
0 answers

Vyatta (Brocade) receives BGP routes, but doesn't show in routing table

What would be the reason for Brocade vRouter to receive BGP routes, identify them as valid and best, but not use in the routing table? *show ip bgp neighbors 169.254.5.1 received-routes > 10.2.0.0/16 169.254.5.1 0…
Anton
  • 1
0
votes
1 answer

vyatta virtual router interface aliasing does not work

I am trying to create an alias on vyatta virtual router. But I do not seem to get it to work. In vyatta we have to just add another address to the interface to add an alias. But the interface is not listening or accepting any connection request.…
gyro
  • 1
  • 1
0
votes
0 answers

VyOS / Vyatta multiple CIDR blocks on one side of IPSec tunnel

I am attempting to link an AWS VPC to a datacenter using the community VyOS AMI and IPSec tunneling, talking to a SonicWall device that I don't control. I've been given the proper settings to establish a tunnel, but I need to pass traffic to two…
MachineShedFred
  • 1
  • 2
0
votes
1 answer

Updating a Vyatta 6.6 box for Shellshock

A client has a few Vyatta installations that they're eventually wanting to replace with VyOS. In the interim, they're running Vyatta 6.6 (last version prior to the sale to Brocade). It's an internal router without any external interfaces, but would…
Ruben Schade
  • 107
  • 2
  • 8
0
votes
1 answer

Can't use a Box in Amazon VPC subnet to connect to the other side of the site-to-site VPN tunnel which is already up

This is what I have done created VPC 192.168.0.0/16 created subnet 192.168.5.0/24 created internet gateway attached internet gateway to VPC created routing table set destination route 0.0.0.0/0 to target the internet gateway associated routing…
black sensei
  • 609
  • 3
  • 10
  • 25
0
votes
1 answer

BGP into OSPF and vice-versa - adding a 'weight' to a route?

This is probably more of a design question. I have two transit providers where I am receiving the full Internet routing table (via BGP) and am also participating in an IX where I am receiving routes from peers within that IX (also via BGP). I then…
cpjones44
  • 160
  • 2
  • 8
0
votes
1 answer

Simple Vyatta configuration / BGP routes not injecting into routing table

I have a exceptionally simple setup I'm playing with however I'm banging my head against the wall as to why it's not working. Right now I have two Vyatta routers (R1, R2) connected locally. Both are connected via a cross connect. I've setup a BGP…
WinkyWolly
  • 598
  • 6
  • 19
1 2
3
4