Unifi is a networking company specializing in WiFi. Use for questions specific to their hardware. Use with [wifi] or [networking] as needed
Questions tagged [unifi]
49 questions
0
votes
0 answers
Port Forwarding on Huawei E5885LS-93A doesn't work
My home network is composed of a 4G router (Huawei E5885LS-93A) and three Ubiquiti Access Points (UAP-AC-M).
Within my network I run ZoneMinder on a Raspberry Pi 4.
From within my network I can just connect to ZoneMinder via 192.168.8.142:80/zm,…
0
votes
2 answers
Can the USW-Enterprise-48-PoE-EU be used in Britain?
I need to purchase a USW-Enterprise-48-PoE as our infra,
is already Unifi based.
needs all 48 PoE ports.
is short on rack space.
USW-Enterprise-48-PoE
As the USW-Enterprise-48-PoE-UK is currently sold out, is there anything stopping…
James Geddes
- 131
- 7
0
votes
0 answers
Why I am getting wrong IP address when connected to the freeradius server with VLAN attribute set
I am new to the Freeradius
I am trying to connect to the Unifi AP through freeradius authentication. I can connect to it successfully and access local services. but I am not getting the correct IP address.
SSID is in VLAN 31 with IPs ranging in…
MecaTheclau
- 1
- 1
0
votes
0 answers
pi-hole/unbound as internal DNS server
Last week I set up Pi-hole mainly for blocking ads and handling a few internal DNS requests. This works fine, when OCD kicked in. I thought it would be nice to add Unbound to the mix to not have to use external DNS server and this hiding my traffic…
vespino
- 111
- 5
0
votes
0 answers
Connecting Unifi Controller running in Docker on ESXi to default VLAN while isolating other containers and container host from default VLAN
I have an ESXi 6.7 host with 6 physical NICs. Those NICs are configured as follows:
vSwitch0:
vSwitch1:
The NICs assigned to vSwitch0 are physically connected to a Netgear switch who's ports are untagged for the specific VLAN that I wish to manage…
kubiej21
- 289
- 1
- 5
- 12
0
votes
0 answers
L2TP VPN disconnects after requests to NAS in VPN network
I installed a L2TP IPsec VPN over a Unifi USG for a client of mine.
Everything works like a charm, expect one user, that tries to connect with a MacStudio. He permanently gets disconnected after he fires a request to the NAS in the VPN.
That…
0
votes
0 answers
High Packet Loss on Device when Plugged into Unifi Network
We have 3 large format projectors of the same model on our network all plugged into a small switch. Recently, we have been unable to reliably load 2 of the 3 projectors' web management pages. Further investigation revealed that we were getting…
0
votes
1 answer
WinRM connectivity issues with workgroup and vlan subnet
Situation:
1 server (Windows Server 2022) (192.168.15.5)
1 client (Windows 11) (192.168.5.5)
Unifi network setup where both machines are on a different VLAN (subnet)
On the server:
Run Winrm quickconfig
Run Enable-PSRemoting
Run…
Geert van Horrik
- 111
- 2
0
votes
1 answer
Recommended IP ranges for Dev SAN with 2 x switches
I am setting up a small Dev environment with 5 hosts, 2 ubiquity switches and a qnap NAS. One switch for the normal TCP traffic and one for iSCSI. I was wondering the recommendation for management of the switches. Unifi switches are managed by a…
Anthony Horne
- 155
- 1
- 10
0
votes
0 answers
Redirect DNS server IPs on Unifi UDM-Pro using iptables
I'm using a Unifi UDM Pro as a gateway for 2 VLANs:
Main LAN (interface: br0, subnet: 192.168.1.1/24)
IoT Devices VLAN (interface: br3, subnet: 192.168.3.1/24)
Each has its own local DNS (Adguard Home) server (192.168.1.52 and 192.168.3.52…
void.pointer
- 525
- 2
- 8
- 17
0
votes
1 answer
Can't access webUI for Unifi Controller locally running in docker
I am able to access other docker containers which are hosted on my server via their web interfaces on various ports, but Unifi Controller is giving me "refused to connect" type errors.
This is the output of docker ps
CONTAINER ID IMAGE …
Syntax Error
- 155
- 1
- 1
- 11
0
votes
1 answer
Separate connections over 1 network cable
Consider the following network setup
┌───────────────┐
┌────────────┐ │ │ ┌───────────────┐
│ │ │ 2 Port RJ45 │ │ …
user22711
0
votes
1 answer
OPNSense and Unifi RADIUS issue
I have an OPNSense firewall and a Unifi controller I am trying to enable Radius authentication and Radius Vlan assignment
On the unifi side I have done the following
Created an SSID
Created A radius profile
Created a network
On the OPNSense side
I…
Kyle Sponable
- 101
- 3
0
votes
1 answer
UniFi Network Controlled Devices Disconnected No UniFi Security Gateway detected
Having an issue where my devices show as disconnected after doing a cleanup setup of a UniFi Security Gateway, switch, and access point in my home network.
The controller also shows that the UniFi Security Gateway is not detected. The devices where…
greg
- 101
- 3
0
votes
1 answer
How can I establish an OpenVPN connection when connected to USG VLAN
I'm using a USG for our business and our remote users connect to an internal VLAN by establishing a VPN connection. We host OpenVPN CE on one of our servers. The client is configured with a public IP and I have a NAT rule defined to forward VPN…
Bob C.
- 75
- 1
- 1
- 7