Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [trunk]

A trunk is a connection between switches where multiple VLAN's pass.

A trunk is a connection between switches where multiple VLAN's pass.

98 questions
1
vote
0 answers

Forwarding mDNS packets from an on-prem network to cloud server and back

Problem Statement : We have an application running on an on-prem Linux server configured with a trunk port and its working is tightly associated to multiple VLANs traffic and certain device IPs present on the same network. We are working on a…
achilles
  • 111
  • 2
1
vote
1 answer

Trunk Group in Aruba Switches

Please help to clarify a doubt I have. I need to configure a Aruba JL357A 2540-48G-PoE+-4SFP+ Switch that will be connected with 4 other switches using the SFP ports. So each port will be set to operate in trunk mode. Port 49 - sw1 Port 50 -…
FredU
  • 35
  • 6
1
vote
1 answer

Edge-Core selective QinQ and tagged vlans

I'm trying to pack some vlans with selective QinQ. I need to inject VID 19,18 to VID 15. #Port facing SP interface ethernet 1/18 switchport allowed vlan add 15 tagged switchport dot1q-tunnel mode uplink description Dot1Q-OneVlan # Switch Uplink…
Tomato
  • 79
  • 1
  • 8
1
vote
2 answers

Combine two ports into one

I have a Cable Modem which an approx. 1200 Mbit download speed connection to the internet. Unfortunately the modem splits the download into across ethernet ports - i.e. 600 MBit each. The Cable Model does not support Link Aggregation (LACP). I've…
1iveowl
  • 135
  • 7
1
vote
1 answer

Trunk mode with HP Switches

I am facing a problem within my network. The scenario is this. I have two HP 2920-24G Switch (J9726A). They are connected with each other and also both are connected to a HP V1910-24G Switch (JE006A) and a 3Com Baseline Switch 2952-SFP Plus. The…
FredU
  • 35
  • 6
1
vote
1 answer

SIP registration timed out

I am facing trouble in registering asterisk to SIP trunk. When I do >sip show registry, it shows SIP request is send but never gets response back. I cannot even ping sip.flowroute.com. My firewall is disabled and system is not behind NAT. What could…
bluewhale
  • 51
  • 2
  • 2
  • 3
1
vote
0 answers

Setting up an Inter VLAN for new building

Have added a building to our existing motel business setup and looking to utilise a fibre trunk to share a single internet connection between an open guest network (LAN and WiFi to guest rooms) and our business network which will now reside in the…
user392084
  • 11
  • 2
1
vote
0 answers

VLANs with mixed MTUs trunked over a LAG

I'm contemplating enabling Jumbo frames for a specific network/VLAN (a dedicated storage network). Ports are spread across two switches, linked together using a LAG, which is configured to carry all relevant VLANs (trunking). I presume the…
sxc731
  • 307
  • 2
  • 16
1
vote
1 answer

Manage Windows Server 2012 and trunk the Hyper-V VM (same physical NIC)

I'm trying to use Hyper-V to deploy a pfSENSE box inside of it. But, the scenario is: 3 VLANs VID: 1000 VID: 2000 VID: 3000 On a physical switch port, I've tagged the Server physical port with those 3 VID, and let untagged on VID 1 What I want to…
ploquets
  • 11
  • 1
1
vote
1 answer

D-link DAP-2695 VLAN configuration

Well... I thought I had this all figured out... I am essentially reopening this same question I had 2 years ago (Reference: D-link DAP-2590 VLAN configuration) I got it all figured out back then and everything has been working GREAT and is still…
Atomiklan
  • 549
  • 1
  • 8
  • 16
1
vote
0 answers

Can pvlan-trunk Ports Carry normal vlans too on Juniper EX8208?

I'm trying to implement pvlan on Juniper EX8208 which will span across multiple switches (to a Cisco nexus 7000 Series) and need to know if the Inter-Switch-Link Port with "pvlan-trunk" will allow normal vlans too?
matrix154
  • 11
  • 1
1
vote
1 answer

ProCurve Trunking

We have 3 switches at the moment - see the diagram below for NOW. Essentially the CORE switch is 7, and 8 and 9 have a 3 cable trunk each to 7. Now, we want to add Switch 5 to the equation - see AFTER - would this be a suitable way of configuring…
PnP
  • 1,684
  • 8
  • 39
  • 65
1
vote
1 answer

ESXI 5.1 - Losing access to management interface on vSwitch1 when vSwitch0 loses network access

I'm probably missing something obvious here, but, I am trying to make some adjustments to the Vkernel Port management interface on vSwitch0 that is set to VLAN ID: All (4095). So I don't disconnect myself, I have added a second switch (vSwitch1),…
Lance
  • 281
  • 10
  • 20
1
vote
0 answers

intel MFSYS25 blade server- trunk port configuration

Can any one help me configure the Intel blade MFSYS25 switch module to communicate to Cisco devices through trunk? I tried for many hours, seems it doesn't work! There seems to be no documentation on this. I just need to connect my Cisco switche's…
chakoshi
  • 49
  • 1
  • 2
  • 6
1
vote
3 answers

Cisco 2960 trunking issue

I have a Cisco 2960 running 12.2(58) SE2 with four VLANs configured (10.10.10.0/24 - 10.10.40.0/24) plus one uplink on a 192.168.1.0/24 network. I have enabled ip routing and the VLANs can talk between one another no problem, but my internet…
Gus
  • 13
  • 1
  • 4
1 2
3
4 5 6 7