Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [truenas]

TrueNAS (formerly FreeNAS) is a network attached storage (NAS) server appliance distribution based on the FreeBSD operating system

412 questions
0
votes
1 answer

t_delta too long error on Freenas 0.7.1

I am using FreeNas 0.7.1 (FreeBSD 7.2-release-p6) Recently I have been getting a series of these error messages to the console. I am using ZFS pools mirrored on the FreeNAS system, and they report as healthy and in good status. I think this error…
Jeremy Hajek
  • 473
  • 1
  • 4
  • 15
0
votes
1 answer

FreeNas running on ESXi - sometimes gets very slugish

I have a ESXi server (dual quad core, 8GB of DDR3 ram, 6x 1TB WD Blacks running in RAid 5 on the PErc 6/i controller. I have a 64bit freenas VM running, on this VM I keep about 200Gigs of stuff that my windows machines access. every now and then the…
Luma
  • 1,460
  • 4
  • 19
  • 31
0
votes
1 answer

Northbridge runs very hot

I set up FreeNAS on an Asus P5B (Basic) with a Pentium D 3ghz processor (may be overkill, but it is a spare machine). The CPU usually runs around 750mhz-1500mhz. I am aiming for a quiet machine so the only fan is on the CPU's Heatsink and the power…
Bob
  • 2,937
  • 5
  • 29
  • 32
0
votes
1 answer

Problem with setting up RAID 5 on FreeNAS

I've been running FreeNAS for a while now. Hardware is 1.8 GHz Celeron, RAM 1 GB. SATA card is Via - I am not sure about the model. It's 2 ports and I have 6 x 1.5 TB hard drives. All ran OK while running on 1.5 TB, no RAID. I'm now trying to…
Benjy23
0
votes
1 answer

TrueNAS SMB Share Inaccessible by NetBIOS Name

I'm currently working on a TrueNAS server to create a file share for a computer lab, and I've got everything working except for being able to connect to the share via it's custom NetBIOS name. I can connect to the share via \\TRUENAS or its direct…
mtloya
  • 1
0
votes
0 answers

TrueNAS Scale update error: mount failed: Operation not permitted.​

I am unable to update from TrueNAS-SCALE-22.02.4 to Bluefin. Independently on whether I let the GUI download the update or whether I provide it manually, I get the following Error: [EFAULT] Invalid update image file. Please, re-download update.…
Rainer Glüge
  • 101
  • 1
0
votes
0 answers

Setup kerberos with nfsv4 for no_root_squash mounts

I am very new to kerberos and nfs. Kindly help to know if this is feasible. The NFS server is Truenas scale and client is ubuntu 22.04 desktop. nfs v4 is enabled in Truenas server and exports /export/home as no_root_squash and sec=krb5 The…
tachy
  • 13
  • 2
0
votes
1 answer

Understanding Samba VFS Operations for Full Audit

We have a TrueNAS System running TrueNAS-12.0-U8 for which we are required to log all successful and all failed file access attempts for a specific SMB share. The Samba version is 4.13. Per guidance from the vendor, I've included the below in the…
sardean
  • 833
  • 3
  • 15
  • 34
0
votes
0 answers

Can access truenas server with ipaddress

I am setting up truenas for the first time and I am having some networking issues. Hardware setup looks like this: server that is running Truenas is connected to a switch via ethernet cable => a different PC is connected to the same switch via…
seriously
  • 121
  • 6
0
votes
0 answers

Tun interface name changes

I have a freenas truenas jail connected to the internet using openvpn. the ipfw rule only allows communication through the tun interface that openvpn creates Now, this tun interface used to be always (several years) just tun0 but recently (some…
Juanma
  • 132
  • 8
0
votes
1 answer

KVM guest low network speed

I have a KVM guest VM running RHEL 8.7 (12vCPU, 24GB RAM) and a hypervisor with 10Gb NICs. I'm getting weird results when using iperf3 on my guest machine as a client and a TrueNAS server as a server. See the image: iperf3 low network speed. I'm not…
chetzz
  • 1
  • 3
0
votes
1 answer

My ZFS pool seems to be self-destructing, any ideas?

Context I recently noticed my freeNAS telling me it had issues with one drive. I had about 16 bad sectors, went through the smart tests etc. I bought a new drive, same capacity, went to install it, and for some reason a power adapter for one of the…
Morg.
  • 317
  • 1
  • 7
0
votes
1 answer

jackett pkg outdated. is it possible to manually install the latest update?

The pkg and port listed for Jackett on FreeBSD is Version v0.20.989 however, the most up to date version is v0.20.2189. This version difference is causing some of my trackers to fail and will not consistently work. Is there any way to manually…
Mitchell
  • 1
0
votes
1 answer

trying to get an md5 from badly named files

I am trying to get the md5 from a lot of files. I would use ls to list files and md5 to get a hash of all the files from multiple directories like so md5 `ls -R /` this would work if the names of the files didn't include spaces like…
Nimball Dimpall
  • 3
  • 1
0
votes
1 answer

How to mount a NFS share with server user

I have the following setup: There is a Debian 10 PC with user A (uid: 1000, gid: 1000) and want to mount a NFS share provided by a server running TrueNAS (12.0-U8.1), which is owned by user B (uid: 1006, gid: 1008). I have to use NFS since this…
MuffinMonkey
  • 1
  • 1
1 2 3
…
27 28