Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [supermicro]

Supermicro is a computer hardware company headquartered in San Jose, California. They design and manufacture server equipment.

286 questions
0
votes
0 answers

I can't turn on sleep on Supermicro X12STH-F board (or find out if it's supported)

I've recently updated to MB Supermicro X12STH-F, Intel Xeon 2388G and I can't make it sleep (OS Windows 10 Pro). It's a server motherboard and cpu, but my previous MB/CPU was also server and sleep was working fine. I read that some server…
NickSoft
  • 278
  • 6
  • 23
0
votes
0 answers

BIOS/OS reporting different memory to dmidecode

I have a SuperMicro server in production with 8x 16GB dual rank DDR3 ECC registered sticks installed (128GB). Had a bunch of ECC errors on one stick one day that caused issues for a few minutes plus the odd one every now and then on a different…
Mark Johnson
  • 11
  • 2
0
votes
2 answers

Supermicro won't boot from RAID virtual drive after a power outage

One of our Supermicro servers won't boot from the virtual drive on a MegaRAID SAS 9361-8i after a power outage. It can still boot from a USB stick without trouble, all hard drives and file systems seem to be intact. The correct drive is not shown as…
frogsicle
  • 11
  • 3
0
votes
1 answer

How to change BootOption bios settings with redfish?

I'm trying to change the NIC a server boots from using the redfish module in python. The server is a supermicro board: Firmware Version 01.00.17 Firmware Build Time 09/02/2021 Redfish Version 1.8.0 BIOS Firmware Version …
Goswin von Brederlow
  • 101
  • 1
0
votes
1 answer

What's the safest way to swap an SSD (RAID 10)?

I have machines (4x 2 TB SSDs, Hardware RAID 10 via LSI 9265-8i cards) and occasionally need to swap an SSD - for example if it fails. I'm curious to hear what people consider to be the safest approach in swapping failed drives whilst a server is…
user12207241
  • 1
  • 1
0
votes
0 answers

Supermicro backplane diagnostics

I have three supermicro servers, 2x 3U chassis with X8DTE motherboard and SAS-836TQ backplanes and 1x 1U chassis with X9DRW-iF with SAS-815TQ backplane. 1 of the 3U backplanes only recognizes 12 out of 16 drives (I've talked about this issue here),…
Pieter Helsen
  • 101
  • 1
0
votes
0 answers

Supermicro Caddies - mounting 2.5" SATA disks in 3.5" caddies

I need to replace some 3.5" drives with 2.5" SATA SSD's in an older (remote) Supermicro system where I do not know the Chassis model. What I do know is the motherboard is an X10DRi motherboard (which dates the system around 2014/2015). What I don't…
davidgo
  • 6,222
  • 3
  • 23
  • 41
0
votes
0 answers

SuperMicro 16-Bay chassis only recognizes 12 drives

I recently purchased two refurbished Supermicro SC836TQ (3U, 16bay) chassis with SAS backplanes (Standard SAS836-TQ planes). One works perfectly fine, but the other fails to recognize/initialize any disks installed in the right-most…
Pieter Helsen
  • 101
  • 1
0
votes
1 answer

Did I brick this X9DRH board?

Tl;DR: Previously-working Supermicro server suddenly has no video output (either from previously-working onboard VGA port or GPU), no iKVM, no output on UART or Serial-over-LAN. IPMI device suddenly cannot detect any of the (previously-working)…
chiashurb
  • 1
  • 1
0
votes
0 answers

console not show , supermicro server

hope you have a good day. This is my first time to configure a server. I'm facing small issue, after I login to super micro server "remotely", the console not showing. note that I already install java and update it. I tried in different devices and…
ghaida
  • 1
0
votes
1 answer

How to identify slot for faulty GPU card in server using UBUNTU OS commands?

I have a question. Is it possible to identify in which slot there is a broken GPU card using the UBUNTU operating system? We have a SuperMicro GPU server in which there are about 8 GPU cards for AI computing. Every now and then we go to the server…
Herman
  • 1
0
votes
0 answers

Server stuck on "Intel Reference Code Execution"

Setup - Supermicro X10DRU-i+ motherboard, 2x Intel e5-2630v4: server started rebooting at random times had memory modules reseated and replaced, reseated CPUs reset CMOS, updated BIOS changed motherboard (!). As soon as we replaced motherboard it…
kK-Storm
  • 167
  • 2
  • 7
0
votes
1 answer

supermicro server - long time for reboot

Dears, I trying to reboot supermicro server first time, and it takes long time more than 30 min and not finish yet. ram was 16G 2400T and change it to 32G 2133T is there any advice?
ghaida
  • 1
0
votes
1 answer

Initialization 91 stuck of Supermicro OEM (HPE) GPU server

I just set up HPE SX40 (Supermicro SYS-1029GQ-TVRT). The system stuck on boot with "initializing ... 91". I tried some crude test like remove all memory, and got relevant error message. So, 1)removed all pcie cards (including NVIDIA SXM2 adapter…
iPsych
  • 1
0
votes
1 answer

Cabling for SAS controller and SuperMicro BPN-SAS-825TQ

I´ve managed to get one of the SuperMicro low-end server to my lab. It is chassis 825TQ-R740LPB with a BPN-SAS-825TQ backplane. The specification document is saying, that this backplane is SAS compatible. But the server has a motherboard with only a…
Jiří Kubeš
  • 1
1 2 3
…
19 20