Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [supermicro]

Supermicro is a computer hardware company headquartered in San Jose, California. They design and manufacture server equipment.

286 questions
1
vote
1 answer

Is a 650W PSU enough for 4x 7k HDDs 2x CPUs and a monster AMD Radeon HD 5990

I bought a supermicro chassis a few years ago with a 650W PSU for a personal lab I built. Everything has been just fine so far, but now that I'm looking into some GPU based work, I'm finding that I might be under powered. I contacted supermicro's…
ACiD GRiM
  • 123
  • 1
  • 7
1
vote
1 answer

Motherboard rejects identical hard drive, one works the other doesn't

I have an interesting situation. I have a Dell XS23-SB server that has four blades in it. The blades use Supermicro X7DWT motherboards, and interface with the sata drives through a backplane. I took two identical drives from a raid 0 enclosure that…
Payson Welch
  • 189
  • 9
1
vote
1 answer

Lost connection to both OS and IPMI after adding VLAN config in CentOS

I have a Supermicro X9DRD-IF motherboard with IPMI onboard. I'm completely losing network (both IPMI and OS) after adding VLAN support in OS network configuration. Network cable is connected into LAN1 port. IPMI is configured as shared. IPMI VLAN is…
Evolver
  • 626
  • 2
  • 6
  • 14
1
vote
5 answers

server not recognising all the ram

I have supermicro X7DB8 motherboard. I have put in 16GB ram 2GB in each slot. It only recognizes 8GB. I know all the ram works because it was working in a different server. If I put 4GB RAM it only recognizes 2GB. I cannot figure out what is wrong
shorif2000
  • 351
  • 1
  • 8
  • 28
1
vote
2 answers

Cannot access dedicated IPMI on Supermicro X8DTT-HEF+

Just got this machine and want to use the IPMI. Each node has a dedicated IPMI port. I have enabled it in BIOS and assigned it an IP address. Even directly connected to it both with and without crossover gets me exactly zilch. The IPMIView utility…
Stephen J
  • 11
  • 1
  • 2
1
vote
2 answers

lm_sensors reports wrong temperature on Supermicro X8DT3?

Here's my system info: System Information Manufacturer: Supermicro Product Name: X8DT3 Version: 1234567890 Serial Number: 1234567890 UUID: 3EFC338F-2038-F257-3B5E-0025902BF938 Wake-up Type: Power Switch SKU Number: To Be…
quanta
  • 51,413
  • 19
  • 159
  • 217
1
vote
1 answer

Kernel Panic after Installation Issues with Ubuntu 10.04.3 LTS

Update 2 The installation from Update 1 was successful. Update 1 Just removed RAID10 from all six drives, and RAID10 configured only the first four devices. After doing so, the installation was able to proceed past the Ubuntu splash screen. So…
hulkmeister
  • 145
  • 9
1
vote
2 answers

Can we "add" more SAS ports to an existing backplane?

We have a 3U Supermicro chassis with 16 bays on a SAS expander backplane. We have 15 of the bays occupied with hard drives at the moment. We would like to add two more drives to the backplane, but we only have 1 bay open. Does anyone know if there…
zippy
  • 1,718
  • 3
  • 21
  • 36
1
vote
1 answer

Supermicro IPMI SSL

I have a Supermicro X9SCA-F serverboard and I'm trying to secure Super Doctor III IPMI by using SSL. I generated my own certs (done this many times before), uploaded via the web interface, then it said it needed to restart & I clicked OK, but it…
churnd
  • 4,077
  • 5
  • 34
  • 42
1
vote
2 answers

RAID bus controller: Intel Corporation 82801JIR (ICH10R) SATA RAID Controller

RAID bus controller: Intel Corporation 82801JIR (ICH10R) SATA RAID Controller Subsystem: Super Micro Computer Inc Unknown device 0007 Is any one know which Linux utility I can install on my server to manage above said RAID device from command…
Suku
  • 2,036
  • 13
  • 15
1
vote
1 answer

Network interfaces gone after first boot, keyboard not working in IPMI Remote Control

I can install Ubuntu 10.10 and 10.04.2 through Supermicro IPMI remote console just fine but after the installer finishes and system reboots, the keyboard does not work through Remote Console window. The physical keyboard attached to the server…
Henno
  • 1,056
  • 5
  • 19
  • 33
1
vote
1 answer

SuperMicro IPMI through OpenBSD PF Firewall

I'm trying to access a SuperMicro IPMI card that is behind an OpenBSD bridged firewall. A couple pieces of information: The OpenBSD firewall itself has a SuperMicro IPMI that I can access across the internet. The IPMI I'm trying to reach can be…
thelsdj
  • 830
  • 1
  • 12
  • 25
1
vote
1 answer

i2c cable for 3ware 9650se and SuperChassis 846A-R1200B

What's the appropriate cable to support i2c (red LED drive indicator, failure) with this combination and what's the best way to order it? I see 3ware supports 846TQ but not 846A from…
DavidM
  • 11
  • 3
1
vote
2 answers

Is anybody familiar with SuperMicro products?

My company wants to deploy some extremely cheap SuperMicro systems that are basically just 1U servers with 4 HDDs that apparently you can stack and link together? I don't have an exact model number but apparently you can get these things for…
ThingsToDo
  • 191
  • 2
  • 5
  • 11
1
vote
1 answer

SuperMicro 1114S-WN10RT (1U, AMD EPYC 7763) «normal» fan speed?

I cant find an information about "normal" fan speed for server. Server: SuperMicro 1114S-WN10RT (1U) with 1x AMD EPYC 7763. Now its 5% load: user@server12:/home/user# ipmitool sdr list CPU Temp | 53 degrees C | ok Inlet Temp | no…
Eugene Gorbov
  • 11
  • 1
1 2 3
…
19 20