Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [static-routes]

Manually configured entries in the routing table.

Manually configured entries in the routing table.

183 questions
0
votes
0 answers

VMware ESXI Behind ASA5506-Xs using Public IP is Not Communicating

Here is the lay of the land. Everything works but I cannot get data flow from ESXI Server or it's VM's I want them using public addresses from behind the router. The Vmware ESXI Hypervisor on a Bare Metal Proliant ml150 gen9 system unit. NIC Static…
broschats
  • 1
  • 2
0
votes
1 answer

FW changes not implemented?

No local iptables involved FW request should have been opened on port 444 however telnet still times out. request should be going out of the mgt nic eth0 looks like the route table will route my traffic through eth2 tho ? eth0 Link…
Esky
  • 1
  • 1
0
votes
1 answer

ipv6 address configuration on serial interfaces

I tried to configure Ipv6 static routing on three routers, I configured ipv6 addresses on all three routers using ipv6 address auto config, The middle router have been configured with different global unicast addresses perfectly on it's both serial…
Brathaban Balachandran
  • 1
  • 1
0
votes
0 answers

Adding a remote default route gives SIOC[ADD|DEL]RT: No such process

I have searched the whole web for this but it seems no one has had similar problem. I have a local network (no internet) which my router ip is 10.201.32.10 and my gateway is 10.201.32.41 I have a VPS with IP 185.10.10.10 which the network allows me…
mojtabaf
  • 1
  • 1
0
votes
1 answer

Static route to Single IP using SSL connection

I am trying to configure a static route to a single IP. My question is two fold: How do I specify a single IP using a subnet mask x.x.x.x/? (not a range of ip's) My pc is making an SSL connection to this ip. Can my router still look at the packet…
Louis van Tonder
  • 141
  • 2
  • 13
0
votes
0 answers

How to define route on all IP addresses except some subnet

I need to set up the following rules: If IP is in range 192.168.0.0-192.168.0.255 then route iut from gateway 1 (let's say 192.168.2.1) otherwise for all other IP addresses route it through default gateway 192.168.1.1 I tried to set up this: route…
seeker
  • 231
  • 1
  • 3
  • 13
0
votes
0 answers

Windows Server 2008, Route LAN IP to choice of Gateway

On my windows server i have a WAN and LAN interface. ON my LAN interface the ip is 10.200.0.1/16 and my WAN has an ip of 192.168.20.100 with multiple gateways192.168.20.1, 192.168.30.100, and 192.168.40.100 If i want to route the traffic of…
soniccool
  • 181
  • 1
  • 8
0
votes
1 answer

Public IP not responding because routing table...?

Fixed with: /etc/iproute2/rt_tables 1 tble_eth0 /etc/sysconfig/network-scripts/route-eth0 104.000.64.0/18 dev eth0 src 104.000.65.38 table tble_eth0 default via 104.000.64.1 dev eth0 src 104.000.65.38 table…
OnTheFly
  • 3
  • 3
0
votes
0 answers

static routes not working for me

I have three routers connected like this: Internet ------- (WAN) RouterA (LAN) ------(LAN) RouterB (WAN) ---- (VPN) ---- (WAN) RouterC RouterA: RV042G; LAN: 192.168.100.100 /24 static route for RouterA: destination 192.168.102.0/24 default gateway:…
dann
  • 1
  • 1
0
votes
1 answer

What is the meaning of "/usr/bin/ip route add 180.151.157.4/32 via 0.0.0.0"

In the process of setting up a VPN client side, openvpn tries to add a route but it fails: /usr/bin/ip route add 180.151.157.4/32 via 0.0.0.0 RTNETLINK answers: No such device The reason why we add a static route for ip 180.151.157.4 to 0.0.0.0…
Jérôme
  • 103
  • 4
0
votes
2 answers

Nginx rewrite location internally to serve static content

I'm trying to serve static content from an endpoint that differs in hierarchy structure than the actual root directory structure. This is the result I'm trying to achieve: 0.0.0.0/Claw/scripts/main.js -> /home/ubuntu/Claw/public/scripts/main.js I'm…
Brodie
  • 105
  • 1
  • 7
0
votes
4 answers

Create IP nullroute blacklist from text file

I've seen various guides out there for how to nullroute a single IP address, and I've done that before. However, I'm not sure how to nullroute a group of IP addresses. Going through each one individually would be too tedious. If I have a text file…
Joey Miller
  • 111
  • 5
0
votes
0 answers

Blackberry OS 10 ignoring static routes

We are trying to get Blackberry 10 devices (include Z10, Q10, Playbook) to find devices on our corporate wan. The end-user devices are on one subnet, while servers on another. The server subnet is NOT accessible via the default route, so we push…
TSG
  • 1,674
  • 7
  • 32
  • 51
0
votes
1 answer

Configuring WSUS server to use NIC#1 (LAN#1) to push, NIC#2 (LAN#2) to sync

Oh boy... This should be easy, but my head is swimming. I work in two domain environments. My primary domain (LAN1) is completely offline, but has regular domain services (DC, DHCP, router (legacy, used for DMZ)...). My lab domain (LAN2) is online,…
Jaxaeon
  • 155
  • 3
  • 11
0
votes
1 answer

Static into OSPF Redistribution

I am trying to create static routes which are redistributed as E1 Type 5 External OSPF LSAs. If I check the routing tables on my other connected routers, these redistributed routes show up properly. However, the routes appear as static routes on the…
THE DOCTOR
  • 185
  • 4
  • 14
1 2 3
…
12 13