Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [static-routes]

Manually configured entries in the routing table.

Manually configured entries in the routing table.

183 questions
1
vote
1 answer

Alma Linux - Gateway fall back is not working, when gateway IP with lower metrics is down

Currently I am using Alma-Linux, where I need to create 2 default gateways for the same NIC. Main intent of 2 default gateway configuration is.. when any one of the gateways is down then it will fall back to other working gateway Gateway…
cpp_learner
  • 71
  • 5
1
vote
1 answer

Alma Linux -Static route configuration is not working as fall back mechanism, when default gateway is down

Currently I am using Alma-Linux, where I need to create 2 default gateways for the same NIC. Main intent of 2 default gateway configuration is.. when any one of the gateways is down then other one will work so that there will be no communication…
cpp_learner
  • 71
  • 5
1
vote
1 answer

Redirecting Netflix and Youtube traffic to another gateway by IP addresses on Mikrotik router

I help a friend in taking care of the network with few buildings with appartments for rent. During the holiday season all apartments are fully booked, and that means we have 40-60 guests. There are 18 smart TV boxes with Netflix, Youtube etc. We…
Kamil
  • 157
  • 2
  • 10
1
vote
1 answer

2 Remote Sites, 2 Different Subnets, with interconnectivity. How to create a single subnet for servers at both locations?

Current Environment: We currently have 2 remote sites, both with their own LAN subnet and servers hosted at each site. Currently each site is using 1 subnet for the clients and servers. Both sites are directly connected to each other over an ISP…
qroberts
  • 285
  • 1
  • 4
  • 23
1
vote
2 answers

Static route - gateway not used

I'm trying to use gateway address 10.10.121.10 in order to forward TCP traffic via this machine. I would like to make that traffic from my machine is going over 10.10.121.10 and that machine 10.200.32.107 thinks it is coming from 10.10.121.10 and…
Bojan Vukasovic
  • 111
  • 1
  • 4
1
vote
0 answers

Manual route doesn't work in Windows 10

I'm struggling to make a static route working in Windows 10 and on a specific PC: it doesn't seem to do its job. Here's the route table before: C:\WINDOWS\system32>route…
virtualdj
  • 111
  • 3
0
votes
1 answer

Which Static Route to Add in Windows to access resources on VPN

I have a VPN Connection, Initially when i was connecting to VPN my internet connectivity was lost. Then i read about disabling the "use default gateway on remote network" check. When i unchecked that it i got internet connectivity however i cannot…
Bhavesh
  • 1
0
votes
1 answer

Ubiquiti EdgeRouter uses default route over static when responding to ICMP

I need to have a working connection between two router devices and the subnets behind them. Everything else in the setup seems to work except one static route. Here is the basic information about my setup: Juniper: Vlan95 10.250.0.1/24 Vlan1 …
nyoatype
  • 65
  • 1
  • 9
0
votes
1 answer

4 NICs, 2 gateways, only two interfaces see network

I have a centos7 os with 4 interfaces and 2 gateways, 2 network ranges. one interface has it's own gateway and works, no problem there. the other 3 interfaces should be using a single gateway, but only one of them is able to see/ping the…
senaps
  • 143
  • 1
  • 2
  • 7
0
votes
1 answer

VPS - how to allow different vpn subnets to comunicate?

I have a VPS A (kvm with Ubuntu 18.04) with VPN server VPN server 10.50.0.0/24 All the vpn clients can ping each others And other VPS B (kvm with Ubuntu 18.04) with vpn server and vpn client from the first above VPN server 10.60.0.0/24 VPN client…
plopes
  • 11
  • 2
0
votes
0 answers

Automatic re-adding default gateway for NIC in Windows 10

I have a problem with odd behaviour with gateway settings being auto-added. I have two integrated NICs on my windows 10 PC with same gateway IP address. One NIC is for ATM KVM (Intel VPRO), second for Internet. So I want to make only second…
adroman
  • 11
0
votes
0 answers

OpenVPN server unable to ping network behind client VPN, Clients can ping server network fine

My OpenVPN Network <-- See image of my network What i want to achieve is for the server to gain access to all clients including any client which is connected to the clients modem, and that all clients only can access the VPN server, so they do not…
rsleek
  • 1
  • 1
0
votes
1 answer

How to multiple incoming from interface[s]

I have 3 interface(2 wan, 1 local) and enabled forward, but only one incoming interface(ppp0) can to local destination, the following is my iptable command: iptables -t nat -A PREROUTING -i ppp0 -p tcp -m multiport --destination-ports 80,443 -j DNAT…
Cloud
  • 1
  • 3
0
votes
0 answers

How to add permanent route AFTER VPN up?

I have a server with a vpn (is vpn server also). For some reasons the vpn is disconnecting occasionally. I have a route that i add manually afte getting up as I need to see from the server (cloud) the internal network, after the vpn. So i add this…
Antonth
  • 1
0
votes
0 answers

2 Offices, 2 Internet Connections, 1 leased line connecting the offices: How to route LAN traffic?

We have 2 offices, each with their own internet connection. We also have a leased line/LAN extension provided by the ISP at each location as well. The way this works is that the ISP provided us a Cisco ME-1200 at each site, Port1 is for the LAN…
qroberts
  • 285
  • 1
  • 4
  • 23
1 2 3
…
12 13