Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [ssd]

Solid-state drive refers to a data storage device that uses solid-state memory to store its persistent data.

832 questions
0
votes
1 answer

Grub Error 18 - Solid State Drive

I recently used Raw Copy to make an image of my 300gb Raptor Hd to a OCZ Vertex SSD 60GB. And When I pluged in the SSD to boot I get a Grub Error 18. I have tried to changed in the BIOS setting to LBA, Large, Auto, trying different…
clint
0
votes
1 answer

Dell T710 with PERC H200: 4xSSD + 8xSAS-HDD OK?

Is it possible to configure a Dell T710 with a PERC H200 RAID controller and 8x 15k 2.5" HDDs and then add 4x X25-E SSDs, purchased separately, when the system is setup, and not sacrifice performance by mixing the SSDs and HDDs? Or is it better to…
sejong
0
votes
0 answers

SSD Software-Raid-0 Ubuntu not as fast as expected

I have an MB ASRock B650 Phantom with two SSD 1TB Samsung 990 PRO m.2 PCIe 4 drives. I set them up in a software Raid-0 with lukscrypt on Ubuntu. The SSD should reach 7.450 MB/s reading, in my naivety I expected almost twice the speed in a RAID-0,…
Marc Johnen
  • 101
  • 1
0
votes
1 answer

HP DL360 Gen 8 not recognizing SSDs

I have HP DL360 Gen 8 Server with P420i controller. I've populated it with 4x1TB HDDs and 2x1TB SSDs. HDDs are recognized correctly and they are visible in controller configuration tool (smart array), but SSDs not. Also the LED indicators on drive…
Krzysztof Moskalik
  • 1
  • 1
0
votes
0 answers

USB SATA adapters not working with SSDs

Has anyone else experienced issues with USB SATA HDD adapters working fine for traditional hard disks but not for SSDs? I haven't been able to find any information about this, but I've now encountered this issue with multiple SSDs and multiple…
SystemParadox
  • 847
  • 9
  • 14
0
votes
1 answer

How to combine an SSD with two HDDs in a RAID1-ish hybrid setup?

Coming from Linux SSD as HDD cache, I'd like to set up an SSD (or rather a partition thereon) as cache for basically a RAID1 of two HDDs. But since the data might remain cached on the SSD for while, I was wondering it is possible to set up the HDDs…
Tobias Kienzler
  • 388
  • 1
  • 9
  • 28
0
votes
1 answer

Does daily rsync OS backup push SSD drives to its limits?

Since past year I'm using Rsnapshot (which uses rsync) to do my daily laptop Linux Ubuntu OS backup to a local NAS. Some months ago I started having serious problems with the OS stability. It seems like the disk drive gets damaged, so the fsck needs…
Danijel
  • 256
  • 6
  • 19
0
votes
1 answer

HP DL360e Gen 8 b320i raid controller with any linux distro not detecting RAID with SSD

I would need some help with an HP DL360e to install ssd's using the b320i raid controller. I prefer using the controller over software raid, unless I really have to. I tried the latest Debian and openSUSE leap. I want to try SUSE leap, as it would…
gstlouis
  • 119
  • 3
  • 12
0
votes
1 answer

Why is ceph is not detecting ssd device on a new node?

I have installed a ceph cluster (quincy) with already 2 nodes and 4 OSDs. Now I added a 3rd host running Debian (bullseye) to the cluster. The new host is deteced correctly and runs a mom. The problem is that no OSDs are listed on the new host even…
Ralph
  • 101
  • 4
0
votes
1 answer

Flash Crucial SSD firmware through PERC 730P Mini RAID controller

We've got a number of Crucial drives in Dell r630 servers with PERC 730P Mini RAID controllers that need their firmware updating as they're still on version M3CR032 with the known issues. The servers aren't live so there is always the option of…
willdashwood
  • 103
  • 1
  • 1
  • 5
0
votes
1 answer

Does the data size of an SSD chip have compatibility issues with certain boards?

I'm considering getting an 8TB SSD storage chip for my Intel NUC mini-server (I install linux on it). However, I'm wondering if there are any considerations one needs to take when adding that much storage space. Will the NUC have a hard time doing…
Patrick Collins
  • 103
  • 3
0
votes
1 answer

Why does fsck not working when I try to repair the filesystem

I try to mount /dev/nvme0n1p1. Disk /dev/nvme0n1: 465.76 GiB, 500107862016 bytes, 976773168 sectors Disk model: Samsung SSD 980 PRO 500GB Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O…
CrazyDuck
  • 1
  • 3
0
votes
0 answers

How to mount a used ssd to a linux server

I want to use my secondary ssd onto my server (the ssd was earlier was used on the same server before the OS on the server was reinstalled). How to mount the ssd so that I can use the old data?
Divija Gogineni
  • 21
  • 2
0
votes
0 answers

Can I make hotremove/add on raid5 with mdadm?

I created and assembled software RAID5 array (mdadm), 15 SSD disks. If I physically remove several disks and add them back, RAID doesn't assembles back. Disks stays in "spare" mode. Even after reassembling by commands. But if I manually fail a…
sin4ez
  • 1
0
votes
1 answer

HDD vs SSD for mongodb database server

I am setting up a physical server for an application that we have developed, the purpose of this server is to run the server's own software and store its database (mongodb). On the server machine we want to configure a RAID 1 storage system to keep…
coantia
  • 3
  • 2
1 2 3
…
55 56