Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [split-tunnel]

30 questions
0
votes
1 answer

Static Route Setup on Windows 10 for Split Tunnel VPN

I have an L2TP VPN service setup on a Ubiquity USG 3 Router. I trying to set up a split tunnel service on Window 10 machine so that: Internet Traffic is sent outside VPN (for speed) Certain Local IP is sent through the VPN tunnel I've unchecked…
Nathan
  • 101
  • 1
  • 2
0
votes
1 answer

Linux access point as tunnel splitter

Since at my workplace they use Cisco VPNs (AnyConnect protocol) to reach production and test servers, i need to be always connected to work on those servers. The problem is that the VPN doesn't implement split-tunneling, so i'm left with either…
CappyT
  • 183
  • 2
  • 3
  • 12
0
votes
1 answer

PPTPD-server split tunnel

Normally the client has to set up the VPN connection to be a split tunnel (not routing internet traffic trough the tunnel, but still have access to local resources), but is this possible to define on the server side? I have a VPN server, which sole…
Lars Erik Storbukås
  • 1
  • 3
0
votes
2 answers

Practical alternatives to split tunneling?

I have seen some IT security audits that request whether split tunneling is implemented for remote VPN users. I can appreciate the peace of mind benefits from disabling split tunneling, since you basically act as a proxy server if the user wishes to…
tacos_tacos_tacos
  • 3,250
  • 18
  • 63
  • 100
0
votes
1 answer

VPN Split Tunneling - Pros and Cons and how to achieve?

Well this is the dilemma, I want remote clients to connect to my network and only route local access through the VPN. This is split tunneling, the client uses its internet connection for all other internet requests and the VPN tunnel to my network…
Theveloper
  • 164
  • 2
  • 11
0
votes
1 answer

Trouble printing to local printer when connected to VPN with split-tunneling enabled

I'm a volunteer network admin for a multi-tenant non-profit office space. One of our new tenants uses a VPN to connect to remote resources using RRAS and Small Business Server 2008. They also have a local network printer for the workstations in…
dcharles
  • 149
  • 9
0
votes
0 answers

iptables per-user split tunnel leaking udp packets

I followed the guide here: https://gist.github.com/GAS85/4e40ece16ffa748e7138b9aa4c37ca52 I've added a couple more rules for local traffic, but my setup is still leaking udp packets, on ports not specifically allowed by my firewall (6881), to the…
Rusty Weber
  • 472
  • 8
  • 21
0
votes
1 answer

Ping Fails but Nslookup Works Over Wireguard VPN

I have run into an odd situation with my wireguard setup. My Setup: Wireguard tunnels access to my network. Active Directory domain controllers provide DNS. Clients use the DNS servers over the tunnel. Linux clients have no problems resolving DNS…
Kheldar Ambar
  • 3
  • 1
  • 4
0
votes
0 answers

Alternative Gateway on Debian running slow

I was looking into a way of using a third-party VPN connection for certain traffic on my local network, I've created a small Debian VM (192.168.1.54) that connects to my third party VPN with other devices on my network able to route through that VM…
Daint
  • 1
  • 1
0
votes
0 answers

When connecting to our LAN via an VPN, MS Outlook repeatedly prompts for passwords

For an email account that is in Exchange Online, if a user connects to our VPN, and then tries to open Outlook (the Windows app), they get prompted to authenticate with Exchange Online. But it fails, I believe due to the fact that it requires MFA,…
Kshaeta
  • 1
  • 1
0
votes
1 answer

Cannot get split tunneling to work in Strongswan

I am trying to setup Strongswan for VPN split tunneling. What I want is only the subnets 10.88.0.0/16 and 10.0.200.0/24 is accessible through the VPN tunnel. Everyting else is handled throught the default gateway for the network. All clients are…
Lasse Michael Mølgaard
  • 947
  • 10
  • 27
0
votes
1 answer

OpenVPN windows split tunneling - route 1 IP outside of VPN

How do I change the config file in Open VPN (windows) to allow a particular IP to go outside the VPN tunnel? I know that if I want only one particular IP to go through the Open VPN tunnel, I can use this command: route nopull route [IP address…
Help
  • 1
  • 1
0
votes
1 answer

LAN access with PulseSecure split VPN disabled

Context: corporate network, win10 PCs. Devs frequently need simultaneous access to a remote network through PulseSecure VPN and to computers on LAN. Policymakers can't be convinced to enable split VPN. One fragile workaround found is to use an…
wojas
  • 3
  • 2
0
votes
1 answer

How can I connect openvpn to a specific port?

I want to use openvpn. But with some differences. I don’t want to send all trafics to the vpn. For example, when using FoxyProxy on firefox and connected to localhost:8000, send traffics to vpn but when the FoxyProxy is off, send traffic to the…
MMTManoury
  • 1
0
votes
0 answers

Cisco Anyconnect and dynamic split include tunneling on Linux

It seems there is some issue with domain-based dynamic split-routing support in the Linux. In OS X, the routing table contains the routes added by dynamically resolving a domain name to an external IP address. In Linux, the routing table only…
Vanuan
  • 147
  • 6
1
2