Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [site-to-site-vpn]

460 questions
1
vote
2 answers

Using IP phones over a VPN?

We have a few small sites that each have a Draytek Vigor (various models) which are configured to create a company VPN. It's setup as follows: Branch 1 (192.168.1.0/255.255.255.0) Accepts Incoming Branch 2 (192.168.2.0/255.255.255.0) Dials…
dannymcc
  • 2,717
  • 10
  • 48
  • 72
1
vote
1 answer

VPN (site-to-site, hardware based) what is proper terminology for these scenarios?

I'm researching how a VPN would work for 2 small offices, so users can connect to a file server in each office to create, write, & read files. All Computers are peer to peer, not domain based. I'm wondering what the proper terminology is for these…
Steve Wasiura
  • 141
  • 1
  • 9
1
vote
3 answers

Can't ping host in OpenVPN Site-to-Site VPN

My logs say that a connection has been established but I cant ping the host. Here are my logs. Firewall 1 Logs: May 24 10:42:57 openvpn[9163]: /etc/rc.filter_configure tun0 1500 1544 10.0.8.1 10.0.8.2 init May 24 10:42:57 openvpn[9163]:…
vrynxzent
  • 113
  • 1
  • 4
1
vote
1 answer

Site-To-Site VPN for internal traffic only

I'd like to connect my home network with my office network. At my office (host) I have a Cisco ASA 5510 ready to go. At my home network I'd like only work traffic to flow through the tunnel (meaning my home network relies on its own gateway and…
ItsPronounced
  • 634
  • 4
  • 18
  • 40
1
vote
0 answers

Can I map IP addresses to allow 2 site to site VPNs with same IP range using Microsoft TMG

I have a Microsoft TMG server with a number of site-2-site VPNs which all have different IP address ranges. Now a client has asked for another site-2-site VPN but their IP range clashes with an existing range. Is it possible to set up some form of…
Phil
  • 3,168
  • 1
  • 22
  • 29
1
vote
1 answer

How to access a printer via VPN (site-to-site VPN with router dialling a server)

I'm trying to set up a VPN between two networks, one home and one office (A and B). Their subnets are (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately they are dial-out only for VPN. There's a Windows…
user76157
  • 11
  • 4
1
vote
1 answer

Replace Sonicwall TZ series

What are some devices that i could use to replace several TZ series devices. The only function i really need is the Site-to-Site VPN. Preferably not a Sonicwall device they have the worst support I ever came across.
alxxer
  • 27
  • 2
1
vote
0 answers

DD-WRT setup access restrictions but allow VPN connections freely

I have two sites with DD-WRT connected via routed VPN. Clients on both routers have Internet Access Restrictions set. This works and correctly blocks internet access. But this also blocks connection between client PCs of the two sites. How do i…
Heinrich Lee Yu
  • 111
  • 1
1
vote
1 answer

Sonicwall vpn user cannot be accessed by VPN tunnel

I have a user accessing a Sonicwall NSA 2400 via vpn (Site A). This Sonicwall has a VPN tunnel to another site (Site B). The user can ping servers at Site B, and access websites located on them, etc. People on the physical LAN at Site A can ping…
ThePfaff
1
vote
3 answers

What firewall should my network configuration be based on?

I’m working on a plan to replace a number of router/firewalls in our company’s and customer’s networks. We have 2 offices and a number of servers hosted in a datacentre that have IPSec VPN links to around 100 customer sites. In the main office we…
mmcg
  • 390
  • 4
  • 11
1
vote
0 answers

Site-to-site VPN using IPCop and Cisco ASA 5505

So I'm coming into a company who wants to move away from their IPCop firewalls and replace them with Cisco ASA 5505's. Instead of ripping the entire network down and keeping it down for however many weeks it takes to set up each new ASA, I decided…
blsub6
  • 1,131
  • 6
  • 25
  • 45
1
vote
1 answer

Routing for IPSec tunnel

For Juniper NetScreen-NS25, I configured a site-to-site IPSec tunnnel. For the outside interface of remote site, I also needed to go through tunnel which has the same IP as IPSec gateway. Now, when I add static route to route that outside interface…
Emre A
1
vote
1 answer

Site to site VPN using RRAS from an untrusted network?

Our remote office will be moving to a new space where internet will be provided. They'll be behind a router doing NAT (I do not have admin rights to this router). They will be sharing a printer with the other people on the LAN, but will need VPN to…
DrZaiusApeLord
  • 1,174
  • 2
  • 9
  • 18
1
vote
2 answers

Joining computers to domain when SBS is running in Datacenter

We are contemplating moving our SBS2k8 server to our datacenter. We would be setting up a VPN-VPN tunnel between everything to handle AD. Has anyone done this before? Any particular issues that anyone can remember? So the flow for AD would now…
ChrisMuench
  • 136
  • 1
  • 5
1
vote
2 answers

Router for creating site to site VPN to server provider using Cisco ASA 5540

We have dedicated servers hosted for us by a third party, we connect to these over a VPN. My server provider uses Cisco ASA 5540 as VPN devices. Currently we're using software clients on individual machines to connect to this VPN, either: Cisco VPN…
TheKeys
  • 113
  • 3
1 2 3
…
30 31