RRAS is an acronym for Routing and Remote Access Service, which is a Microsoft API and software which allows administration of routing and remote access capabilities of the operating system.
Questions tagged [rras]
285 questions
0
votes
1 answer
RRAS VPN Issues - Windows Server 2008 R2
I'm trying to setup a VPN on a new Windows Server 2008 R2 box that is running Hyper-V.
I have setup the VPN using the RRAS and can connect to this VPN from my PC - however I can't access any resources on the Hyper-V host or it's VM's when…
Glenn Morton
- 101
- 1
0
votes
1 answer
Single NIC VPN Setup on Server 2008 R2 and RRAS
Is it possible to set up a VPN server on a machine running Server 2008 R2, when you only have one NIC? I'm trying to connect to my server with the following setup
Windows 7 -> Internet -> Linksys WRT54G -> Server 2008 VPN
It seems no matter what I…
mclark1129
- 555
- 2
- 11
- 28
0
votes
1 answer
Windows Server 2008 VPN creates a DNS record and breaks server access for internal clients
We have a server running Windows Server 2008. It runs DC, DNS etc and has RRAS configured. Users can VPN OK, with no issues. Under normal operation server can be found at .3, however once a VPN user connects, a new DNS record is created, .90, and…
Naozumi
- 138
- 9
0
votes
1 answer
Hyper-v Internal Network - No internet Access
I am trying to setup a virtual network in Hyper-V to give my VM internet access. I have created an internal and external network, and I see both connections inside of the Network Connections manager. However, when I click on the status of…
user66827
- 215
- 2
- 3
- 9
0
votes
3 answers
Can't VPN into WS2008R2
I am a new administrator to Windows Server 2008 R2. I am trying to set up a VPN connection to my server with not much luck. Thus far I can connect to my server with a VPN PPTP connection but I cannot see any of the public files on my server or see…
user871962
- 129
- 1
- 4
- 8
0
votes
2 answers
Static IPv4 tunnel with Windows Server 2008
Is it possible to create any sort of plain (IPv4, non-ipsec) static tunnel interface using only components of Windows server? Any protocol will do as long as there is reasonable linux support for the other endpoint. IPIP or GRE would be great.
I…
the marlboro man
- 11
- 1
0
votes
1 answer
Getting error when trying to connect to home VPN server
I have setup a RRAS server on my AD machine running WS2008R2. When I set the RRAS to use a static IP pool, I can connect from my VPN just fine (I'm connecting from the built-in VPN client in Windows 7). However, when I change my RRAS to use DHCP and…
void.pointer
- 525
- 2
- 8
- 17
0
votes
2 answers
Windows 2003 - RAS service - VPN client can only connect to server, not internal network
Here is my diagram http://imageshack.us/photo/my-images/263/vpnt.png/
Server has two NIC: One connect to Internet, one connect to internal network. RAS service is configured with static IP pool on the same subnet of internal network (10.10.0.x). The…
Gk.
- 728
- 12
- 20
0
votes
1 answer
Windows Server (SBS) 2008 - Telephony service won't start (missing permissions)
I am running a SBS 2008 server. It's setup as the domain controller for the network.
After a reboot, the Telephony service (and all services that depend on it) refuses to start under the Network Service account. The error given is:
Error 1297: A…
Uri
- 1
- 1
0
votes
1 answer
Windows Server 2008 R2 missing PPP adapter - where are the clients supposed to connect to?
We have a Windows Server 2008 R2 box. It has one NIC, with the address 192.168.0.2. We set up RRAS, enabled VPN protocols, and told it to use a static address pool, 192.168.0.224-239. On our router, we set up a public IP to be forwarded to .224.…
fejesjoco
- 89
- 3
- 14
0
votes
2 answers
VPN server setup on a 2008 R2 Hyper-V VPS
I am renting a Windows 2008 R2 VPS (Hyper-V). It has 1 network adapter which has a public IP statically assigned.
I wish to allow incoming VPN connections, so that I can access SMB for a central file server.
I have setup RRAS, and VPN'ing in works…
servermanfail
- 201
- 1
- 4
- 12
0
votes
1 answer
Windows Server 2008 R2 RRAS VPN client routing
Our company network is 10.0.0.0/24 (not /8 as the class suggests, this wasn't my decision, and sadly can't be changed). We set up an RRAS VPN server. Windows 7 clients are advised to be set up not to use this VPN as the default gateway. So when…
fejesjoco
- 89
- 3
- 14
0
votes
2 answers
Disable Windows Firewall (on server) for VPN-Connected Clients
I'm working with a friend who is having an issue with failed RDP hacking attempts eating up bandwidth on his server. His server is a Windows Server 2008 R2 box which is directly connected to the internet, using only the Windows firewall and no…
cjones26
- 276
- 1
- 6
- 18
0
votes
1 answer
After NAT how to setup VPN in windows server 2008 r2?
We have one windows server 2008 R2 with about 10 Hyper-V virtual machines. We've used wizard that comes when you enable RRAS to setup NAT, so that virtual machines can connect to internet (and to access thoes VMs from outside via RDP).
Now we would…
This is it
- 171
- 1
- 2
- 10
0
votes
1 answer
How do I fix Hyper-V Guest OS connectivity problems through RRAS/NAT?
I have a Hyper-V host machine with NAT set up for my guest virtual machine. At a client site, the host connects to a wireless network through a cert (and then there's a proxy to access the extranet).
My guest machine can't access the extranet and…
Ikrima Elhassan
- 11
- 2