Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [qnap]

QNap is a manufacturer of NAS appliances.

97 questions
1
vote
1 answer

QNAP, Hyper-V, unstable windows

I have problem with extremely unstable WS 2012. I'm using physical server connected with HP switch with 2 ports set by NIC and configured as swithc independet (LACP didn't work). my QNAP is also connected with two ports as a trunk to that HP switch,…
Kai
  • 33
  • 1
  • 10
1
vote
1 answer

QNAP TS-EC1279U with X520-DA2 (10GBe) Loosing NIC conneciton after workstation reboot

=== Configuration=== Your Operating System you are using to access your NAS. Win 7 NAS model: TS-EC1279U-RP Firmware Version/: 4.1.4 Network Setup Single Port Static IP (192.168.1.199) (10GbE) === Storage === QNAP - TS-EC1279U-RP Intel -…
Arthor
  • 195
  • 4
  • 18
1
vote
0 answers

Nas QNAP 469, locked files

We use shared folders, and sometimes files are locked by users. I have connected to qnap via SSH and trying this command: /usr/local/samba/bin/smbstatus It showed me "Locked files" with PID, but these numbers are duplicated in different…
shallrise
  • 89
  • 1
  • 13
1
vote
2 answers

QNAP TS-859U+ RAID5 volume unmounted, e2fsck_64 hangs

We got this QNAP TS-859U+ with firmware version 3.8.1 Build 20121205 at our datacenter. It has Intel(R) Atom(TM) CPU D525 @ 1.80GHz processor and 1GB RAM, 8 of 3TB (Seagate ST33000651AS CC44) drives and they form a 7 drive RAID5 array. The other…
ubunmutu
  • 11
  • 1
  • 3
1
vote
1 answer

How many volumes on NAS?

I have a question about creating volumes on a 6 bay nas server with 24 TB of space with RAID 5 we are a school and we want to store all the school's data on the nas server. like student's and teacher's temp folders, videos, backups, department's…
spirited
  • 21
  • 4
1
vote
1 answer

QNAP: ACL does not work over NFS

Having difficulties making Linux ACL (getfacl/setfacl) work with NFS shares. We are using Ubuntu clients and QNAP storage as server. At the moment only root user on Ubuntu has read/write access. Normal user (like www-data) gets permission denied…
Ross
  • 135
  • 1
  • 10
1
vote
1 answer

Qnap TS-410 deleted folder by accident anyway to recover data (raid 5 / ext4)?

I am not in a very good situation at the moment, and bit stressed! I have a Qnap nas (TS-410), this operates on a Marvell 6281 800MHz CPU, while I SSH'ed into the Nas box, I deleted the wrong folder (rm -rf), Is there anyway I can get this…
Dino
  • 111
  • 2
1
vote
1 answer

Telnet does not give a response

Some wireless access points are acting a little weird, so I want to reboot them every couple of hours. Luckily there exists a security flaw which lets me login as root through telnet when using port 1111 (without username and password). Now I want…
floorish
  • 253
  • 5
  • 9
1
vote
3 answers

Mounting NAS share: Bad Address

I have a Linux storage device (QNAP TS-459U), and 'massive1' folder shared. I need to mount this share on my Debian server. They are connected by regular patch cord. The Debian server has two network interfaces - eth0 and eth1. eth0 is for Internet,…
Korben
  • 21
  • 1
  • 4
1
vote
2 answers

How much performance cost for hdd encryption on NAS?

I recently purchased a NAS and it offers encryption. It is a QNAP TS459 Pro II. How much will performance be impacted if I choose to encrypt the data on the device?
macek
  • 315
  • 2
  • 4
  • 10
1
vote
1 answer

Error trying to connect to iscsi target with Windows initiator on W2K3

I am trying to connect to an iScsi array (hosted on a QNAP 859URP+) from my W2K3, via a 2nd NIC. I have my QNAP 859URP+ connected through LAN1 to my switch. It gets it's IP from our DHCP server. I want to connect LAN2 directly to the server. I have…
Saariko
  • 1,791
  • 14
  • 45
  • 75
1
vote
0 answers

zfs send to NAS with PIGZ compression slowness

The following command that I use to backup used to take 5 minutes to complete and since last week it is taking around 25 minutes. This is after restarting a switch stack the server is connected to. The NAS 192.6.222.116 is in a different subnet to…
najarajar
  • 11
  • 1
1
vote
2 answers

Unable to access Qnap NAS device

I have a Qnap NAS connected to Qnap QSW-M2108-2C managed switch. That switch has one port leading to the internet and another port connected to a MacBook running Qfinder Pro. Everything was working fine and I was able to connect to the NAS…
hughesdan
  • 25
  • 7
1
vote
1 answer

Failed to deploy OVF package. ThrowableProxy.cause A general system error occurred: Transfer failed: Invalid response code: 500

Versions: ESXI: 7.0 Update 2 (build number 17867351) VMware Workstation: 16.1.2 build-17966106 I exported a VM from QKVM (Qnap KVM) and been trying to import it into one of our ESXIs using vCenter, but to no avail. It imports successfully to a…
IDEtoSATA
  • 45
  • 1
  • 2
  • 7
1
vote
1 answer

QNAP QTS v5 OpenVPN to Wireguard server migration

QNAP's QTS version 5 has now Wireguard as a protocol in QVPN. There is however - as opposed to to OpenVPN - no option to download an easy-to setup config file to quickly connect a client to your NAS. It seems that users need to create their own…
uncovery
  • 305
  • 5
  • 14
1 2
3
4 5 6 7