Questions tagged [qlogic]
23 questions
0
votes
3 answers
ESXi FibreChannel Woes
I just recently got VMWare ESXi installed on one of our servers. I installed some fibre channel cards (QLogic) and for some unknown reason they show up in the storage adapters tab as an ISCSi Adapters. However, this does create some issues as I can…
TacticalKitchen
- 49
- 1
- 6
0
votes
2 answers
MultiPath configuration on RHEL5 and Clariion CX-300
I have problem with discovering my FC-connected CX-300 storage. Frankly speaking I'm complete novice in FibreChannel, so step by step explanation would be appreciated. My configuration consist of two IBM HS20 blades with RHEL5.4 on board and 2x…
Kamil Z
- 177
- 1
- 7
0
votes
1 answer
qlogic HBA tuning recommendations random iops
Trying to squeeze out the most performance from a 3PAR SAN with Qlogic HBA in our HP servers. We run on Centos 5.5 with latest updates/kernel.
Can anyone give useful recommendation or tuning to get maximal RANDOM IOPS ?
Right now we hover around 290…
coderwhiz
- 212
- 1
- 11
0
votes
2 answers
Solaris Fibre Channel target - Configure QLogic QLA2340
I'm currently trying to set up a small storage system as a fibre channel target. This is for testing, so I'm currently using Solaris (Nexenta) and a QLogic QLA2340 HBA.
For some reason, the qlc and qlt drivers don't support the QLA2340, so I'm using…
growse
- 8,020
- 13
- 74
- 115
0
votes
1 answer
Qlogic QLE8152 connect to a DS14 disk shelf
I am trying to configure a NETAPP DS14 disk shelf to expose the drives to a windows or a linux machine, I don't have a controller but I got a FC to ethernet adapter (Qlogic 8152)
however the loop does not connect, I see that the DS14 supports max of…
Anton Banchev
- 3
- 5
0
votes
1 answer
HP NC523SFP no link detected
I have two HP NC523SFP 10Gb 2-port (1 on a HP DL380e Gen8 and the other on Dell PowerEdge 2950) both systems have Centos 7, the cards are detect and are running the same firmware.
I have connected directly the servers with 10Gtek SFP-H10GB-CU2M…
DarkVex
- 388
- 1
- 14
-2
votes
1 answer
Fibre Channel Ports and Tape Library
I am looking for advice rather then fix my issue.
What should fibre channel port settings be? Currently F_ports,
I have a qlogic 5800 sanbox switch connected to quantum scalar i40 lto7 library over fibre channel.
My backup product P5, speeds…
P78W
- 1
-2
votes
1 answer
Can I use a HBA to connect to Internet
I recently got a QLogic QLE2460 network card which seems to be a Host Bus Adapter. Can I somehow use it as a network interface (NIC) between my server/workstation and a Cisco Catalyst switch with fibre channel modules.
If no, what fibre channel card…
AirPett
- 201
- 1
- 2
- 9