Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [pppoe]

69 questions
0
votes
1 answer

PPPoE link has IP address, but 100% loss

I couldn't figure out what's the problem with the PPPoE link. Here is the log entries I have found on pfSense. The interface is up and IP address has been requested, but all packets are said to be lost at 100%. This is the overview of these two…
Angela
  • 117
  • 2
  • 6
0
votes
7 answers

How can I connect a router on a network but network admins must see as a PC

I am an electronic engineering student. Our internet connection is provided to us with a PPPoE connection in our dormitories. We are connecting to the internet with our user name and password, and there is also a MAC filter. You cannot enter your…
user20793
0
votes
1 answer

simple dsl modem, static ip, and pppoe config challenge

I'm in China and our new DSL broadband is a super cut-rate Huawei box that takes an optical input and has 4 LAN ports. You can set the box's 192.168.X.1, and then it expects the four LAN inputs to be static manually assigned IPs on the same range.…
Drew
  • 661
  • 6
  • 9
0
votes
1 answer

autostart ppp connection when vlan comes up

I want to start a ppp connection on my router on startup, but i need to have a vlan activated before. The problem is that if i ifup the vlan in the ppp interface, the vlan is not up when pppoe tries to connect. this is how my…
reox
  • 165
  • 2
  • 10
0
votes
1 answer

Wrong Device answering PPPoE auth request

The basic configuration is a CentOS machine running rp-pppoe and a separate router, both connected to a DSL modem through a simple switch. Each device has it's own separate PAP id/password. This configuration has worked fine for years, until the…
Illuyankas
  • 3
  • 2
0
votes
1 answer

Cisco 877 as PPPoA/PPPoE bridge (no routing) - how to make it listen to IP for management?

I have a Cisco 877 configured to bridge ADSL with PPPoA to PPPoE on Vlan1. This works fine, but in this mode the only way I can configure the Cisco is via the serial console. I'd like to have the Cisco also listen on an IP address so I can…
Ingmar Hupp
  • 606
  • 1
  • 6
  • 13
0
votes
2 answers

Cisco Redirect traffic to an interface

I have a Cisco 2901 with 2 internet WAN connections, one it have a static public ip, and the other one have a ftth dial connection. I have already both configured but what i need is the following: Currently: Internet_connection_1 (static ip) as a…
Santial28
  • 41
  • 6
0
votes
1 answer

PPPoE Connection : "Generic-Error "RP-PPPoE: Child pppd process terminated"

I have 2 Ubuntu 64-bit Virtual Machines installed on Virtual Box.Their name and ip addresses are given below.I am trying to establish PPPoE connection between the two machines. nas 192.168.129.130 (This machine runs the PPPoE server) home …
liv2hak
  • 303
  • 4
  • 13
  • 25
0
votes
2 answers

How can I connect to the internet using a pppoe account in Sabayon Linux?

I recently downloaded Sabayon Linux 4.2 Gnome Edition. I burned a dvd and started the live version. I tried to configure a pppoe account like I do in most Linuxes, using the pppoe-setup/pppoeconf command, however, no pppoe commands show up in bash's…
Geo
  • 157
  • 7
0
votes
1 answer

how auto run pppoe connection for valid ip on windows server 2008 [startup folder not help]

i bought an ip valid from my adsl isp and made a pppoe connection for using that ip in my windows server 2008.(my server) i want to force that connection to run automatically when log off/on or windows starts! i made a shortcut of that connection in…
SilverLight
  • 290
  • 3
  • 11
  • 22
0
votes
2 answers

Provider cable in switch?

Is that possible to get internet connectivity if cable will be plugged into switch port? Something like that - Provider - Switch - Router. Switch is a L2 managed unit, and router running RouterOS. I know that this is possible to put DHCP server on…
Lex
  • 1
  • 1
0
votes
1 answer

How to quickly configure a pppd server on "linux"?

Purpose: boot an Ubuntu 10.10 LiveCD, and run a pppoe server on it... I thought it's just like this: 1) I create a user 2) I run "pppd require-pap" ...but noooo why? I'm trying to run pppd but it gives the: pppd: The remote system is required to…
LanceBaynes
  • 3,087
  • 9
  • 29
  • 31
0
votes
1 answer

Cisco ASA: How to route PPPoE-assigned subnet?

We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is…
Martijn Heemels
  • 7,728
  • 7
  • 40
  • 64
0
votes
1 answer

Intermittent disconnect: which needs replacing, the router or the modem?

We have a WatchGuard SOHO 6 with the latest firmware (6.4.1) and an ISP-supplied DSL modem. The firebox's PPPoE settings look like this: We've been having a problem lately where our internet service will go down every once in a while at no…
Kev
  • 984
  • 4
  • 23
  • 46
0
votes
2 answers

PPPoE and FreeRadius

We have a number of wireless clients using ubiquity radios that support PPPoE. The number of connected clients is currently sitting around 20. But this is increasing rapidly and we want better control so we plan to authenticate users against a…
hookenz
  • 14,472
  • 23
  • 88
  • 143
1 2 3
4
5