Questions tagged [ovh]

Questions about dedicated server, cloud, and VPS services provided by OVH. Other OVH services might not be on topic at Server Fault.

123 questions
0
votes
1 answer

No supported authentication methods available (server sent: publickey)

I forgot that I wasn’t using SSH Key for that particular VPS and mistakenly added the following line in my VPS sshd_config: “PasswordAuthentication no” And restarted the server through command. Now, I’m unable to login to my OVH VPS as it displays:…
0
votes
2 answers

OpenVPN stopped loading sites in Tunisia

I have had an OpenVPN setup for a few years now. I've got three computers around the world connected to a central server (OVH France), and I've been using this to talk between them and route all internet traffic with only minor issues for all of…
Y_Less
  • 103
  • 5
0
votes
2 answers

VPS in OVH doesn't boot (stuck on SYSLINUX)

I have a VPS in OVH. I think maybe they have updated the kernel and now my server is not going up. I have entered in KVM and I see the system stuck with the message: Booting from Hard Disk... MBR SYSLINUX 6.03 EDD 20150107 Copyright (C) 1994-2014…
SnakeDrak
  • 111
  • 6
0
votes
1 answer

KVM guest not reaching externally (OVH, failover IPs)

Both host and guest are running Fedora 26 server edition. Host is from OVH, guest is ISO from Fedora directly. I've trimmed anything regarding TXRX and loopbacks for the sake of brevity. Main IP a.a.a.17 Main IP Gateway a.a.a.254 Failover IP…
0
votes
1 answer

KVM network bridge debian OVH/SYS

Have gotten a server from SoYouStart (cheap OVH) that was planning on setting up a few KVM guests. Installed Debian Jessie and the required packages qemu-kvm libvirt-bin virtinst. Acquired additional IPs from SYS, now the fun part. Using Xen…
0
votes
1 answer

Unable to Remote Desktop into Windows 2012 R2 Kimsufi Server Due to Possible Windows Hibernation

I recently set up a Windows Server on Kimsufi's dedicated server plan. I was able to successfully get it up and running and was able to successfully remote desktop into the server. After updating the server and restarting it, the server had an…
0
votes
1 answer

GRE With scaleway

i'm having some problem here to create a GRE tunneling, it' theoretically simple, i have 2 clouds, one, with DDoS Protection, and another, without that. In my first cloud, it have DDoS, hosted in OVH, in my second, it have not DDoS, hosted in…
0
votes
1 answer

How to route ipv6 to an openvz container?

My hosting provider, OVH, offers me a /64 ipv6 block. I'm pretty new to ipv6 and a bit of a newbie in networking in general. I was able to route an ipv6 on my proxmox server by properly configuring my /etc/network/interfaces and setting up an ipv6…
Trent
  • 133
  • 1
  • 3
0
votes
1 answer

LXC CentOS Container does not work with multiple IP addresses

Hoping someone can help me as i've been pulling out the only hair I have left (which is not much) trying to figure this out. I'm unable to assign multiple IPs to any CentOS 7 container, only the first adapter/IP works correctly. This only happens on…
sMyles
  • 153
  • 1
  • 1
  • 8
0
votes
3 answers

How to configure DNS Zone to use a different IP as Email server?

I used to have my web and email services on the same machine, on the same IP address, so my DNS Zone was relatively simple. Now, I am setting-up 2 separate machines, for Web server, and for Email server. Server #1 for Web services :…
AlexLaforge
  • 206
  • 2
  • 13
0
votes
0 answers

VM How to setup 2 NIC for FailOver IP (BridgeClient)

I'm currently having trouble figuring out how to setup correctly my new VM's NICs. The server have 2 NIC under Centos 6.8, both will need to be configured to their own (OVH) Failover IP address. OVH the hosting company already explained how to…
exomic
  • 101
0
votes
2 answers

Proxmox VE 4.2 issue on OVH servers,LXC can't access internet

I have replaced the IP with dummy IPs. 1.2.3.4 is the main IP 5.6.7.194 is the LXC Dedicated IP Details for main server: Main IP network interface 1.2.3.4 auto lo iface lo inet loopback iface eth0 inet manual auto eth1 iface eth1 inet manual auto…
Arvind
  • 1
  • 2
0
votes
3 answers

Have 2 different applications use 2 different ip's with the same port on the same host

I want to have an application running on x.x.x.x:80 and another one at y.y.y.y:80 on the same host. I have bought 2 ips from ovh and would like to know how to do so. I found these: Debian/OVH: How to configure multiple Failover IP on the same Xen…
user325985
0
votes
1 answer

Server not booting after 16.04 upgrade (not pinging)

Yesterday I upgraded my server to 16.04, all fine and when I rebooted the server has rebooted to rescue. I fixed packaging conflicts via apt-get autoremoveapt-get upgrade etc... I also tryed to repair grub mounting my hd in /mnt and working with…
0
votes
2 answers

Mounting an SSD

I have recently got a 'dedicated GAME server' from OVH and I've been promised 2x480GB SOFT SSDs. However, df -h shows this output: root@dedi:/home/shavit# df -h Filesystem Size Used Avail Use% Mounted on /dev/root 20G 4.2G 14G 24%…
shavit
  • 187
  • 1
  • 2
  • 6
1 2 3
8 9