Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [netbios]

140 questions
0
votes
1 answer

Access authorization does not work well after replacing a NAS using Kerberos on a Windows server 2012 R2

Environment: A SOHO network under an Active Directory domain controller on a Windows Server 2012 R2. A NAS with access authorization via Kerberos on the domain controller. The DNS server is on the domain controller. Due to hardware problems, I…
Taiki Bessho
  • 159
  • 1
  • 1
  • 8
0
votes
1 answer

Unable to access SMB share only on netbios alias

So we have an ancient Win7 machine which has been used as a file server. This thing has come to the end of its life, and the 20-user limit is starting to hit us hard. I have set up a FreeNAS server, and configured it with its own NetBIOS name, and…
agentroadkill
  • 131
  • 6
0
votes
0 answers

How can I refer to a computer in a domain using the NetBIOS name as is done with users? i.e. domain\computer like domain\user

I've tried researching this, but none of the documentation I've found states how this is done, or if it is possible. I can refer to a domain user like so: domain\user Even when the domain is actually ad.domain.com because the NetBIOS name of the…
Payden K. Pringle
  • 119
  • 6
0
votes
1 answer

Slow connection establishment with SMB on Windows 7 using VPN

I am using Windows 7 professional with service pack 1 installed. After installing large amount of system updates (using Windows Update), I started to experience problems with SMB on my PC. This problem was not present before the update. Taking into…
Przunk
  • 1
  • 3
0
votes
1 answer

Printing with Old Application (Win2000) is Slow

I have a legacy application that I honestly do not know a whole lot about running on Windows 2000. Sometimes printing is slow. It creates a file at a remote location (I will call this location B) and then prints it. In order to create this file,…
Kyle Brandt
  • 83,619
  • 74
  • 305
  • 448
0
votes
1 answer

netbios not working using ip nor symbolic (cname)

There are more than a few questions/answers related to 'System error 53 has occurred' and lots of answers that, does not apply to this issue. I have a computer named 'caicos' and a dns cname  'share' for the same.  Using NetBIOS, some…
fcm
  • 422
  • 1
  • 3
  • 13
0
votes
1 answer

WINS server for inter-VLAN NetBIOS resolution

I have two VLANs. Clients are on one VLAN and there are a couple servers (including a file server) on another VLAN. I have L3 routing between the VLANs. Clients can ping the servers' IP addresses and can also (via net use) access SMB shares directly…
Whimsical Seaplane
  • 145
  • 2
  • 2
  • 8
0
votes
0 answers

Win server 2003: bind netbios name to ip address

I have a Win 2003 enterprise edition cluster. Each group of resources has its own ip address and network name. Here is the result of nbtstat -n: Public LAN(1): Node IpAddress: [192.168.1.7] Scope Id: [] NetBIOS Local Name Table Name…
Filippo
  • 377
  • 5
  • 18
0
votes
1 answer

Resolve NetBIOS names without full qualification

I am connected to my office VPN and I can successfully RDP into my computer using the fully qualified name for it PC00001.myofficevpn.plc. When I try to connect using only the hostname PC00001, I do not get access, is there any way to resolve this?
Stefano d'Antonio
  • 378
  • 2
  • 3
  • 8
0
votes
1 answer

What does a REGISTRATION; NEGATIVE; RESPONSE; UNICAST message mean (UDP 137)?

I am seeing on the gateway of a WiFi network a flood of these messages: 12:32:53.334215 IP PRINTER.netbios-ns > 10.10.10.254.netbios-ns: NBT UDP PACKET(137): REGISTRATION; REQUEST; UNICAST 12:32:53.334295 IP 10.10.10.254.netbios-ns >…
WoJ
  • 3,607
  • 9
  • 49
  • 79
0
votes
0 answers

Rebuilding Domain From Scratch. How to Use Old Netbios Domain Name on new DC?

I have a client that I am currently in the process of upgrading from Windows Server 2003 to Windows Server 2012R2. They are a small business, working off of a single server. The decision was made to rebuild their entire domain from the ground-up…
Dow-J
  • 1
  • 1
0
votes
1 answer

Debian 8(Jessie): netbios name resolution

To resolve netbios names on Debian 7(Wheezy) I used to install winbind and append a 'wins' in /etc/nsswitch.conf. This procedure appears to not work on a freshly installed Debian 8.2(Jessie). It does, however, work on a Debian Jessie upgraded from…
bagratte
  • 3
  • 3
0
votes
1 answer

NetBios issues with multiple adapters, may not be turning on

I'm working in a Windows 2008 server. I'm getting conflicting messages as to weather or not netbios is enabled. The problem is that my AD users can't "discover" the server. I think that netbios is to blame. look at this screen shot. obviously, I…
wlraider70
  • 133
  • 7
0
votes
0 answers

Samba logging all Macs on our network to log.workstation

We have a Samba share on an Ubuntu 14.04 server. Per-machine logging is switched on via log.%m. I understand from the Samba documentation that %m is the NetBIOS machine name for the client machine. Our network is a mixture of PCs and Macs. The PCs…
MikkyX
  • 195
  • 3
  • 12
0
votes
0 answers

Computers not showing up in each other's workgroup browser

I have set up a VPN network between my Windows 7 home computer and my remote Windows Server 2003. This all works fine, the computers can ping each other and I can also access the server's smb shares using it's IP address (10.8.0.1) or even its…
PaulK
  • 111
  • 5
1 2 3
…
9 10