Questions tagged [nat]

In computer networking, network address translation (NAT) is the process of modifying network address information in datagram (IP) packet headers while in transit across a traffic routing device for the purpose of remapping one IP address space into another.

Most often today, NAT is used in conjunction with network masquerading (or IP masquerading) which is a technique that hides an entire IP address space, usually consisting of private network IP addresses (RFC 1918), behind a single IP address in another, often public address space. This mechanism is implemented in a routing device that uses stateful translation tables to map the "hidden" addresses into a single IP address and readdresses the outgoing Internet Protocol (IP) packets on exit so that they appear to originate from the router. In the reverse communications path, responses are mapped back to the originating IP address using the rules ("state") stored in the translation tables. The translation table rules established in this fashion are flushed after a short period unless new traffic refreshes their state.

As described, the method enables communication through the router only when the conversation originates in the masqueraded network, since this establishes the translation tables. For example, a web browser in the masqueraded network can browse a website outside, but a web browser outside could not browse a web site in the masqueraded network. However, most NAT devices today allow the network administrator to configure translation table entries for permanent use. This feature is often referred to as "static NAT" or port forwarding and allows traffic originating in the "outside" network to reach designated hosts in the masqueraded network.

Because of the popularity of this technique (see below), the term NAT has become virtually synonymous with the method of IP masquerading.

Network address translation has serious drawbacks on the quality of Internet connectivity and requires careful attention to the details of its implementation. As a result, many methods have been devised to alleviate the issues encountered. See the article on NAT traversal.

2002 questions
7
votes
2 answers

public ip resolves externally but not internally

I have a one to one NAT on pfsense that assigns a public IP to an internal IP (running a web server). When I open the public IP from an internal machine, it will not resolve to the internal IP, instead it opens the router web page. When I open the…
001
  • 491
  • 1
  • 11
  • 21
7
votes
3 answers

How to get VirtualBox NAT working with actual client IP's?

I'm using Virtualbox 4.0.10 on a Debian Squeeze box. I have a Windows 7 VM that I use to host a game server. After setting up NAT and port redirection, clients can connect to the VM, but the game server shows it's getting connections from the NAT…
Albert
  • 71
  • 1
  • 1
  • 2
7
votes
1 answer

How do I assign a public IP to a machine behind a pfSense box using 1:1 NAT?

This should be dead simple but for the life of me, I can't get it working. I must be doing something stupid. I have a PFsense server with a public IP address. Behind it is three LAN segments: [ Internet ] <---> [ pfSense] …
Josh
  • 9,190
  • 28
  • 80
  • 128
7
votes
1 answer

Need to duplicate UDP packets to multiple destinations via iptables

I'm looking to duplicate UDP traffic for SYSLOG and NetFlow data and was hoping to use iptables to do so, but so far I'm not having much luck. I'm aware of other user space software packages that can accomplish this, but they don't seem very well…
syn-
  • 493
  • 3
  • 7
  • 10
6
votes
2 answers

Port forwarding test possible within LAN? Mikrotik Router

I set up port forwarding on a Mikrotik router, but the router OS (v6.39.2) seems a lot more complicated than the standard off-the-shelf router interface I am used to. I followed the instructions from here and these are the settings I entered in…
evsc
  • 161
  • 1
  • 2
6
votes
4 answers

In AWS, why is an EC2 behind NAT gateway in private zone said to be safer than one in public subnet?

I've been running four servers on AWS for a few years. It's for a hobby project. All servers live in the same subnet in the same VPC. To simplify the management of accounts and permissions, I've decided to use Active Directory. This means installing…
6
votes
2 answers

What is the AWS NAT Gateway?

I'm not sure what caused it, maybe Elastic Beanstalk, but at some point AWS created me a "NAT Gateway" which costs more than my EC2 server instances themselves. What does it do, why does it cost so much, and why do I need it for things like EC2? It…
atkayla
  • 201
  • 2
  • 7
6
votes
3 answers

Port forwarding with OpenVPN

Set up an openvpn server but having trouble getting ports forwarded to the client. Below is what I am trying to do: WAN: 123.45.67.89:4444 -> [OpenVPN Server] -> CLIENT: 192.168.1.10:4444 Seen many different answers on how to do this but no matter…
Red Spider
  • 61
  • 1
  • 1
  • 2
6
votes
2 answers

How to configure a MikroTik hAP ac lite router as a Layer 2 switch?

Here is an overview of the network topology: Both the Fritz!Box 7340 and MikroTik hAP ac lite router currently act as DHCP servers, effectively splitting the network in two LANs. The MikroTik router was also configured as a bridge for the…
Serge Stroobandt
  • 385
  • 1
  • 5
  • 13
6
votes
1 answer

UDP hole punching still required in IPv6, even without NAT?

Background (skip ahead for question) IPv4 needed NAT for address conservation. The firewalling properties of NAT were also beneficial for security. IPv4 NAT firewall rules are "block incoming packet remote-address:port -> local-address:port, unless…
Peter Stock
  • 188
  • 1
  • 7
6
votes
1 answer

iptables/nat/prerouting ignores UDP packets?

The same effect on many servers with various kernel versions. There are multiple Iptables DNAT rules: iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 12345 -j DNAT --to-destination 10.20.30.40:5678 iptables -t nat -A PREROUTING -i eth0 -p tcp…
user2743554
  • 397
  • 3
  • 13
6
votes
5 answers

NAT as a firewall

Network Address Translation ( NAT ), seems to sort of act as a firewall for the hosts behind it because they are not available. Although I would never rely on this as my firewall, what are its failures as a firewall? I am asking this for what I…
Kyle Brandt
  • 83,619
  • 74
  • 305
  • 448
6
votes
1 answer

Proxmox Nat Networking Issue

Definition I have installed Proxmox 3.2 and i am trying to configure a virtual machine as a communication server that handles all traffic and forwards them to the nodes with private ip. I configured server for NAT networking with two CentOS virtual…
efesaid
  • 368
  • 3
  • 5
  • 15
6
votes
1 answer

How to set mark on packet when forwarding it in nat prerouting table?

I have a few port forward rules like this iptables -t nat -A PREROUTING -p tcp --dport 46000 -j DNAT --to-destination 172.16.8.2:46000 iptables -A FORWARD -p tcp -d 172.16.8.2 --dport 46000 -j ACCEPT I wonder if there is a way to add new forward…
Poma
  • 1,299
  • 6
  • 24
  • 35
6
votes
3 answers

How do I route a public IP range over an IPSEC VPN?

So, I have an established IPSec Site to Site tunnel. Site A has a SonicWall, Site B has a EdgeRouter. The first tunnel consists of Site A's NATed ips to Site B's NATed ips. Everything works as expected. Next, I have a public IP range that Site B…
William Hilsum
  • 3,536
  • 6
  • 29
  • 39