Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [mikrotik]

Latvian manufacturer of computer networking equipment, known for the Linux-based operating system known as MikroTik RouterOS.

The main product of MikroTik is a Linux-based operating system known as MikroTik RouterOS. Installed on the company's proprietary hardware (RouterBOARD), or on standard x86-based computers, it turns the computer into a network router and implements various additional features, such as firewalling, virtual private network (VPN) service and client, bandwidth shaping and quality of service, wireless access point functions and other commonly used features when interconnecting networks.

http://en.wikipedia.org/wiki/MikroTik

317 questions
0
votes
0 answers

MikroTik - configure NAT behind NAT

I have primary Mikrotik router connected to Internet provider and serving internal network 192.168.88.0/24. I also have second Mikrotik router which I want to plug into my internal network of the first router and server its own internal network. I…
ivan.ukr
  • 117
  • 1
  • 7
0
votes
0 answers

Windows server inaccessible through rdp or smb after being idle

Trying to figure out a problem where the server not responds to rdp or smb connections after being not used for around 3 hours (i.e. all users are out and only background services running). Two onboard 1GB Nics are teamed switch-dependent LACP mode…
SelfishCrawler
  • 127
  • 1
  • 5
0
votes
0 answers

Conflict between two mikrotic's vpn access

The company I work has two physical addresses, and a mikrotic in each of the addresses with vpn configured and working, however if I am at address 1 and I connect to vpn at address 2 and I try to access or ping the server does not work, as if the…
Jhonathan Candeu
  • 1
0
votes
1 answer

Block "ethash.poolbinance.com" on MikroTik

Can you explain me. How I can block this address from firewall on MikroTik. I just try to add the rules with only "poolbinance.com" and other rule with "ethash.poolbinance.com" But it is not working. Thank you for help. full address looks like…
turtle
  • 1
  • 2
0
votes
0 answers

Using a Mikrotik router's SMB service as a file share witness gives error

I am having an issue trying to use use a Mikrotik CCR router as a file share witness in a WS2019 cluster. I can connect to the share with RW access on a standard Windows 10 machine as well as on one of the member servers in the cluster so I know it…
dustovich
  • 1
  • 1
0
votes
2 answers

Squid proxy server returning error

I have designed a topology which has an external proxy server (192.168.239.152) and a Mikrotik Router (192.168.239.151). The MikroTik router connected with a LAN and enables internet connection to LAN PCs. The LAN PCs has IP from the block…
Abhi
  • 1
0
votes
1 answer

mikrotik route appear and removes every second automatically

Mikrotik OS v6.48.2 has routes # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 ADS 0.0.0.0/0 193.168.1.1 1 <<<<<<<<<<<<<<<<<<<<< 1 S ;;; dyno 0.0.0.0/0 …
Master
  • 1
  • 2
0
votes
1 answer

How to connect to vpn from the another subnet with the same external IP

I'm working in a building where you rent a room for the office work. We have our server in one of the rooms and other employees in other rooms. The problem is that server needs its own network (don't ask why. Too much to explain) so we set up a VPN…
Norbox
  • 5
  • 2
0
votes
1 answer

Yealink phones fail to get IP once assigned voice VLAN via DHCP (Mikrotik)

I am deploying Yealink IP phones (T40G, T23G) on following newtork equipment: CCR1009-7G-1C-1S+ as a router CRS328-24P-4S+ as switches Config of the switch in trouble is here. I set up DHCP option 132 to configure VLAN for phones. Before deploying…
Eugene
  • 297
  • 1
  • 12
0
votes
2 answers

How can I set up a point-to-point IPv6 GRE tunnel encrypted with ipsec between my Mikrotik CCR2004 router and a Linux host running Strongswan?

I need to encapsulate IPv4 in IPv6 for routing purposes. One end is a Linux box running quagga, and the other end is a Mikrotik CCR2004. How?
Falcon Momot
  • 25,244
  • 15
  • 63
  • 92
0
votes
0 answers

mikrotik: ip forward between two local networks

I have two local networks and a public one connected to my Mikrotik via VLAN. I want the local networks to see each other without any nat. So I have the following config on my Mikrotik. But the local networks can't see each other. /ip address add…
Hassan
  • 21
  • 3
0
votes
0 answers

A gre tunnel between Mikrotik and Cisco router

I really need your help I'm trying to connect a Mikrotik router with a Cisco router with GRE tunnel using Public IPS the problem is when I try to configure keep alive between both routers the tunnel is down when there is not keep alive the tunnel is…
Ibrahim Salah
  • 11
  • 2
0
votes
0 answers

Load balance ecmp two ISPs and three routers

I have two ISPs, ISP A 10.10.10.1/30 connect to mikrotik router with local IP 172.17.17.0/24, and ISP B 20.20.20.1/30 connect to cisco router with local IP 192.168.100.0/24. recently I bought new mikrotik router, I want to load ballance this two…
casthrotopes
  • 1
0
votes
1 answer

Mikrotik Routerboard connected to ISP via Cisco 2900 Router

I'm sorry it's a bit of a long one and I had to mask some information. With that said, I am in a conundrum and need help. Our network guy left and I've been tasked with getting the house in order. I do have a bit of background in networking but…
Yazid Shayau
  • 3
  • 2
0
votes
1 answer

Can't connect Mikrotik OpenVPN Client to Linux server

Greethigs! I would really appreciate any help! For the last two days i cannot make Mikrotik router connect to Debian 10 OpenVPN server. For each connection attempt router shows the following error message: Status: terminating... - could not add…
Andrew
  • 1
  • 1
  • 3
1 2 3
…
21 22