Questions tagged [ip-address]

IP address is a numerical label assigned to each device participating in a computer network that uses IP for communication.

An Internet Protocol address (IP address) is a numerical label assigned to each device (e.g., computer, printer) participating in a computer network that uses the Internet Protocol for communication. An IP address serves two principal functions: host or network interface identification and location addressing. Its role has been characterized as follows: "A name indicates what we seek. An address indicates where it is. A route indicates how to get there."

The designers of the Internet Protocol defined an IP address as a 32-bit number1 and this system, known as Internet Protocol Version 4 (IPv4), is still in use today. However, due to the enormous growth of the Internet and the predicted depletion of available addresses, a new addressing system (IPv6), using 128 bits for the address, was developed in 1995,[3] standardized as RFC 2460 in 1998,[4] and its deployment has been ongoing since the mid-2000s.

IP addresses are binary numbers, but they are usually stored in text files and displayed in human-readable notations, such as 172.16.254.1 (for IPv4), and 2001:db8:0:1234:0:567:8:1 (for IPv6).

The Internet Assigned Numbers Authority (IANA) manages the IP address space allocations globally and delegates five regional Internet registries (RIRs) to allocate IP address blocks to local Internet registries (Internet service providers) and other entities.

Source: Wikipedia.

  • See also:
586 questions
0
votes
1 answer

Assigning a Public IPv4 automatically to every KVM VM thats being created?

Im wondering how would i go on about assigning a public ipv4 to each vm thats being created. Setup : Host Server with 3 IPs on CentOS8 using libvirt and kvm to virtualize Bridge br0 using eth0 as interface. After a lot of Trial and Error i managed…
0
votes
1 answer

Prevent Windows Server 2019 with static IP from detecting new networks?

we've got some Windows Server 2019 VMs running on XCP-NG. They are configured with static IP addresses. We have two VM hosts: a primary site and a backup site. Our network admin has created a VLAN that he can switch between the sites if the…
zevgeny
  • 21
  • 3
0
votes
2 answers

Do routers need to have assigne IP from given VLAN to foward VLAN packages?

(sorry for my basic question but I had noone to ask) Does routers/smart-switches that foward/pass vlan packets inside same network need to have assign IP from that given VLAN that they foward packets (thru TRUNK port) or they only need one IPfrom…
Va_ni_tas
  • 26
  • 2
0
votes
0 answers

I Could not ping or curl master node flannel interface

I have 3 nodes in the cluster, one is the master node and two are the worker nodes. I use CNI flannel for the Kubernetes cluster. I run an Nginx ingress in my cluster for the load balancer and the hostname is host.com this is my pods in the…
newcomers
  • 1
  • 4
0
votes
2 answers

Best way to route traffic based on logged in user via specific redundant route?

I have an Ubuntu 20.04 machine with 2 ethernet interfaces with 2 IP addresses each. It's an AWS EC2 instance and each of the 4 IP addresses has an EIP attached to it via NAT. Both interfaces connect to the same internal subnet. The setup looks like…
MoWo
  • 443
  • 1
  • 10
0
votes
0 answers

Server changes Domain Name to IP in address bar

I'm no server guru so looking for some assistance. I am hosting a laravel project on a digital ocean droplet, and pointing a subdomain registered at godaddy to said droplet. The address bar is updating to display the server IP rather than the…
0
votes
0 answers

how can I switch between ip addresses

How can I switch between IP addresses on Ubuntu 18.4. My network card has several IP addresses. How can I, for example, change my IP address automatically every 10 seconds?
0
votes
1 answer

What exactly is a floating IP and how does it work?

I am setting up a high availability load balancer. I found this tutorial from Digital Ocean which says that two load balancers can share a common floating…
0
votes
0 answers

Security issues with configuring default IP address(0.0.0.0) to ethernet interface

In our linux embedded application we would like to keep available ports up and running and assigning with 0.0.0.0 IP address. In short we will be executing all ports with ifconfig ethX 0.0.0.0, and setting all IP address to virtual interfaces…
Gilson PJ
  • 101
  • 6
0
votes
1 answer

Cannot assign a previously used static IP address to an OpenVPN client

We have an OpenVPN server with the following server.conf: local x.x.x.x port 1194 proto tcp dev tap ca ca.crt cert server.crt key server.key dh dh.pem auth SHA512 tls-crypt tc.key topology subnet server 10.8.0.0 255.255.0.0 ifconfig-pool-persist…
pacoverflow
  • 261
  • 2
  • 3
  • 17
0
votes
2 answers

Connecting to Google Cloud MySql DB with a changing IP address

I connect to a Google Cloud MySql db from my laptop, however my IP address not only changes at home, but also when I travel. I have to specify the allowed public ip address in Google Cloud, but every time I reconnect I have to log in & update google…
0
votes
1 answer

How to get OpenVPN client's public IP when it connects to the server?

I need to know the public IP (aka ISP's IP) of a client when it connects to my server. I tried learn-address script but it does not provide real IP. Currently it is possible to get it from OpenVPN log files, (pattern: MULTI: Learn: 10.2.1.5 ->…
Chitholian
  • 131
  • 1
  • 7
0
votes
1 answer

Azure outbound IP

In Azure, if I were to deploy a Virtual Machine it would "out of the box" have outbound internet connectivity. Is the assumption that the public IP, for the outbound connections of this virtual machine, would be one of the Azure IP Ranges and…
0
votes
1 answer

Client IP is seen as router IP by server when requesting server using public IP/domain by same-network client

I have been struggling with the above question for countless hours and haven't been able to find an explanation for the behavior either on this site or any other site for that matter. Might be me using the wrong queries though. This is my first…
Maanloper
  • 73
  • 4
0
votes
1 answer

Resolving Domain Name to Private IP AND Public IP Simultaneously

Background (Skip if not interested) I have a dev server running in my local network. I can reach it easily by private IP (192.168.2.4). I have my firewall ports open on the server for :80 so I can reach my website. So far no problems at all. I then…
GoreDefex
  • 133
  • 1
  • 11