Questions tagged [hp]

HP (Hewlett-Packard) is a server and network equipment manufacturer. This is a generic tag to be used when discussing HP hardware or software with no more specific tag available - See the list in the main tag wiki.

HP (Hewlett-Packard) is an American company encompassing multiple brands and product lines, including servers, network equipment, storage equipment, workstations, components, and consumer electronics.

HP has acquired several major industry names in computing, including Compaq and 3Com.


Wherever possible a more specific tag should be used. For example:

,

1513 questions
7
votes
3 answers

What is the name of this screw? (from HP ProLiant quick-deploy rail kits)

I need the name of the screw for the HP quick deploy rail kit. The screw clicks into the square holes of the rack. It is a Gen4 Rail kit but the screw is like the Gen8 Rail kit ones. I called HP support, but they couldn't really help me.…
kockiren
  • 886
  • 3
  • 14
  • 37
7
votes
1 answer

replace controller, add second controller, or use expander?

I have a Proliant DL380 G6 that I am re-purposing as a Hyper-V host for a new, off-site data center that will host our DR services. The server currently has a P410i controller with the 512MB BBWC module. The drives installed are SFF 6G 10K drives. I…
longneck
  • 23,082
  • 4
  • 52
  • 86
7
votes
5 answers

ML350 G5 - upgrade hot swap drives to 6 Gb/s?

I support a non profit. They got an ML350 G5 donated to them and I immediately put it to good use for them :) It came with four HP 300GB 15K SAS drives - and of course, they have all now failed. I have been replacing the drives and they are all…
EricEE
  • 73
  • 6
7
votes
2 answers

HP ProLiant DL380 G4 SATA support?

I'm planning to get a second hand HP Proliant DL380 G4 and setup it as storage server, probably using NexentaStor and setup a ZFS system. But now I wonder does DL380 G4 can be convert or support SATA hard disks? SCSI hard disk will not be enough…
hoon
  • 71
  • 1
  • 2
7
votes
2 answers

Convert a Smart Array RAID5 array to a RAID6 (ADG) variant

I have an HP MicroServer (N36L) with a SmartArray P410 controller, a 512MB BBWC unit and four (4) 2TB disks connected. Three of those disks are configured as a single RAID5 array and one is left alone. I'd like to migrate the RAID5 array to a RAID6…
pjsawicki
  • 71
  • 1
  • 1
  • 3
7
votes
4 answers

VMware - persistent "Host memory status" alarm in vSphere

I have a particular VMWare ESX 4.1 host that has a very persistent "Host memory status" alarm. This is running on an HP ProLiant DL360 G7 server. The HP ILO and System Management agents don't know any errors. If I clear the alarm in the vSphere…
ewwhite
  • 197,159
  • 92
  • 443
  • 809
7
votes
1 answer

Are keys for HP ML 150 G6 chassis all the same?

Recently we dragged a heavy box next to the HP ML150 G6 Server which had a chassis bezel key sticking out of it. So the bezel key broke in half. Is it possible to buy just a replacement key or they are all unique to their corresponding bezels doors?…
Vlad
  • 170
  • 1
  • 5
7
votes
2 answers

HP SmartArray RAID controllers - Linux driver differences (cciss versus hpsa)

I've finally started to test the newer versions of RedHat 6.x and Scientific Linux on HP ProLiant hardware. My previous installs were in virtual hardware, so I didn't notice the raid controller driver change. The first thing I realized on a physical…
ewwhite
  • 197,159
  • 92
  • 443
  • 809
6
votes
2 answers

HP ProLiant DL380 G7 LFF - Is every SAS HDD compatible?

I am just starting to get into server hardware, so please bear with me. I bought a HP ProLiant DL380 Generation 7 with a LFF drive cage and I do not know which SAS drives are actually compatible. Does every SAS drive work? In particular i found…
Sandrogo
  • 163
  • 1
  • 6
6
votes
2 answers

HP ProLiant Server Drive compatibility

I have a DL360 g7 & a DL380 g8 server in my office, and I'm interested in replacing my g8 drives for newer drives with more storage space. My question is - are the g8 drives compatible in the g7 drive slots or do they require a different…
Joe.B
  • 71
  • 4
6
votes
2 answers

HP ProLiant DL365 G5 fan noise

I have an HP Proliant DL365, I know it is an old thing. But it works fine for what we have here. But the last time this thing makes a lot of noise and a few lights glow up: When I search in the eventviewer I see no strange things, no errors or…
markm
  • 61
  • 1
  • 2
6
votes
1 answer

Expand RAID array on HP Dynamic Smart Array B320i controller

I have a few HP ProLiant DL360e Gen8 servers that are equipped with the Dynamic Smart Array B320i RAID controller. One particular system was shipped with a single disk installed instead of a pair of drives needed for a RAID 1 mirror. I asked for…
ewwhite
  • 197,159
  • 92
  • 443
  • 809
6
votes
2 answers

Resetting factory defaults - HP Proliant DL360 gen8

I have an HP Proliant DL360 gen8 server that seems to have USB turned off in the BIOS. I would like to enable it again. With the USB turned off, I cannot intervene during POST - the USB keyboard does not work. I have tried to use the virtual…
eskimoroll
  • 63
  • 1
  • 1
  • 4
6
votes
6 answers

Ubuntu installation can't detect hard drives

I'm installing Ubuntu onto a HP Proliant DL360 G7 server, which has a hardware Smart Array RAID controller that is not compatible with Ubuntu. HP say the RAID controller needs to be disabled in the BIOS in order to install Ubuntu. The problem is,…
swdee
  • 113
  • 1
  • 1
  • 6
6
votes
1 answer

Reusing a drive from an array

I read the question here Reusing Raid 5 Drive? but I'm not sure it applies 100% to my situation. What is the standard practice when removing a drive from an array to use as a spare for another array? Is it absolutely necessary to wipe the drive and…
nullByteMe
  • 420
  • 2
  • 5
  • 17