Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hp-smart-array]

"Smart Array" is the name used by Hewlett-Packard's line of enterprise-grade RAID controllers.

498 questions
0
votes
2 answers

HP smart array p800 low battery

We keep getting emails notifications as it switches between enable and disable. It is old hardware so we won't be replacing the batteries. This is the alerts we are getting. Accelerator Board Status Change: Slot 5. Status is now Temporarily…
lbanz
  • 1,609
  • 5
  • 20
  • 30
0
votes
1 answer

HP Proliant ML350 G5 - smart array initializing

I have a big problem with a HP ProLiant ML350 G5 with 2 SAS HDD 146GB. It start with the message : "Slot 0 HP Smart Array E200i ... initializing" without any error message. if I test the HDD with the Maintenance utility, it doesn't find any Disk ! I…
Phil
  • 9
  • 2
0
votes
1 answer

HP DL380 G7 Losing Drive Array

I have an HP Proliant DG380 G7 dropping one of it's arrays every hour, on the hour, for 2-5 minutes. The OS is SBS 2011 Standard, the servers runs Exchange, DC, files & Trend WFBS 8. I can watch the D Drive disappear for the duration of the problem…
jidl
  • 151
  • 1
  • 2
  • 9
0
votes
1 answer

P410i: replacement disk disk is not synchronizing; Port ID changed from 1l: to 2l:

Little problem: Our SA 410i changed the adress of slot 5 of the disk-backplane from Port 1l: to Port 2l:. I don't know why there were no configuration changes made. We have an HP 380 G6 with an integrated Smart Array 6i Controller. Sometimes we…
Bernhard
  • 1
0
votes
2 answers

RAID Configuration & File System - What to RAID 1 and what to RAID 0

I recently received my first server - it is a HP ProLiant 320e G8. I've installed Debian Wheezy on it. I had to disable the HP Smart Array controller (B120i) because it was creating problems with the installation (I thought I read that Debian…
John
  • 1
0
votes
1 answer

How to set two RAID1 on the HP SA-E200i controller?

I have an HP ML350 G5 with a RAID 1 between two SAS disks. I want to add 2 extra disks and configure a new RAID 1 separated from the other one. Reading this topic Multiple RAID arrays on E200i it seems possible but how can I perform this…
Jerton
  • 1
0
votes
1 answer

Is it possible to use a HP P410 Controller in a ML150 Gen5 server? i.e. is there a cable that interfaces with a Gen5 cage?

Specifically I want to use a SAS card (a P410) and some drives that I have spare in a ML150 Gen5 server. If there is a cable that converts mini SAS to the Gen5 SAS cage connection can someone point me to it? Or can I use a ML150 Gen6 cage in a…
JTew
  • 113
  • 1
  • 1
  • 6
0
votes
1 answer

How to set up direct access storage between a BL460c Gen8 (Win Server 2012) and D2220sb storage blade

I have installed a D2220sb storage blade in a c3000 enclosure. The storage blade's partner device is a HP BL460c Gen 8 Server. How do I setup a direct access storage? I have googled and tried to find documentation or steps. I have never installed…
shresthaal
  • 117
  • 1
  • 1
0
votes
1 answer

SmartArray P400 Create Logical Drive Erase Data?

Does create logical drive on a Smart Array P400 erase existing data? I have a disk that was from a RAID1 set on a IBM server. It's currently plugged in a HP server in order for me to read the data. Since P400 does not have JBOD feature, I am…
Supremo
  • 21
  • 4
0
votes
2 answers

data lost with RAID5 on proliant DL360 when drives fail

For some reason the Array Controller on my Proliant DL360 G6 couldn't recognize 2 of the 6 750GB drives I am running in a RAID 5 configuration with VMware ESXi 5.1. When I rebooted the server I chose the BIOS option (F2) to recognize the 2 drives it…
user127875
  • 9
  • 1
  • 2
0
votes
1 answer

DL360 G2 SNMP drive failure location

I've got this service call with the snmp information provided below, about the drive failing in HP DL360 G2 server: Error log Event Type: Error Event Source: Storage Agents Event Category: Events Event ID: 1064 Date: 2013-06-07 Time:…
Ziwi
  • 13
  • 1
  • 1
  • 4
0
votes
1 answer

HP ML350 G5 Smart Array E200i battery voltage not low

I have a similar problem like this: HP ML350 G5 Smart Array E200i battery error Gets error message that says it is low voltage power on battery. Has measured voltages of the battery and it is exactly what it should be. Error code is: 269 Anybody…
KjetilP
  • 1
  • 1
0
votes
3 answers

ESXi PCI passthrough SmartArray P812 with 12TB MSA60

I have an HP Proliant DL 360 G6. ESXi is installed on the array controlled by the on board RAID controller (P420 I think) ESXi recognizes the P812 RAID controller but when I put PCI passthrough on it I get a purple screen of death. My goal is to…
h3rrmiller
  • 143
  • 1
  • 9
0
votes
1 answer

Checking Hard Disk Health on HP P410 RAID Card

How can I regularly check health of HDDs on a HP DL180 with P410 RAID Card on a live system? hpacucli is installed, however, could not see any options for this feature. Using CentOS, 64-bit. Thanks in advance.
John
  • 105
  • 2
  • 3
  • 9
0
votes
1 answer

HP ProLiant DL360 G4p compatibility with external SAS enclosure

I have a ProLiant DL360 G4p and a StorageWorks MSA60. The SmartArray controller currently in the DL360 is a SmartArray 6400. I would like to upgrade it to a controller with external mini SAS so I can connect the DL360 and MSA60. Q1: Is this…
h3rrmiller
  • 143
  • 1
  • 9
1 2 3
…
33 34