Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hp-smart-array]

"Smart Array" is the name used by Hewlett-Packard's line of enterprise-grade RAID controllers.

498 questions
0
votes
0 answers

PAGE_FAULT_IN_NONPAGED_AREA (srv.sys) Windows Server 2012 r2

I have an HP proliant 380 gen9 server. The issue started with the server restarting it self on check the ilo logs i found out that we had smart battery failure so we replaced it. After turning it on again the system works for ~10 mins and then gives…
Netfoxf
  • 1
  • 1
  • 2
0
votes
1 answer

How to configure HP Smart Array P822 controller with single SAS HDD

I have SAS Seagate Exos HDD and HP P822 Smart Array controller with 2GB cache with battery backup. I don't want to create any arrays, this is supposed to be single storage HDD in my workstation. All important stuff I back up regularly so I don't…
Wolf
  • 1
0
votes
1 answer

Debian on HP Gen9 — most recent hpssacli appears to be too old

I've installed a recent Debian 10 Buster system on to the server, which is HPE DL360 Gen9. It has P440ar adapter, which works with the "new" hpsa driver. As far as I remember, RAIDs were configured with built-in "pre-boot" GUI utility. All firmwares…
Nikita Kipriyanov
  • 10,947
  • 2
  • 24
  • 45
0
votes
1 answer

HP Smart Array P400 max. HDD size

I have an HP DL320s server with HP Smart Array P400 raid card. The server is quite a low spec, but I am only using it as a storage server so I don't need much. It has 12 hot-swappable bay backplane. Now all bays are occupied with 750GB drives, so…
Jan
  • 21
  • 5
0
votes
1 answer

HP Smart Array - Swapping drives in RAID set to upgrade

I have a HP DL360 G7, with Smart Array controller that has 2x RAID sets (RAID 10). Host OS is VMWare ESX. The 2nd RAID set has 4x 10k 600GB Midline drives that are to be upgrade to 15k 600GB Enterprise drives. In the old days I would have just…
Sean W
  • 1
0
votes
1 answer

HP Smart Array P410i Logical Volume failed, how to rebuild it without lossing data

I have a failed logical volume on an HP Smart Array P401i with vmWare installed. Is there any way to rebuild the logical volume without losing precious data? logical volume failed on vmware
Biggy Dongsky Natski
  • 1
  • 1
0
votes
1 answer

HpCISSs2 + \Device\Raidport0 issue

For some time in my HP DL380 G8 I have struggling with the problem with HpCISSs2 which is provider of \Device\Raidport0 was issued problem. In event logs this problem occurs many times per day. Result below: > - System - Provider [ Name] …
Theo
  • 31
  • 5
0
votes
2 answers

Can I make an Active Spare disk permanent?

We have a ProLiant ML350P Gen8 server with a P420 controller running ESXi 5.5. It has a RAID 6 array using 7 disks. One of the disks got marked as Predictive Failure, and in response to this we added an 8th disk to the array as a spare. We ejected…
mwfearnley
  • 816
  • 1
  • 11
  • 22
0
votes
1 answer

HP P410 offline RAID expansion and migration

I have a 2 x 146GB SAS in RAID1. I bought 2 more, same specs drive. I am on a production server. I have a P410 with 512MB cache, but no battery. I can afford a downtime. My questions are: Can I load ACU boot CD and add the new drives, in offline…
Catalin Cernat
  • 3
  • 1
0
votes
1 answer

Logical Drives degraded due to the loss of a redundant path. What is wrong?

HP p822 (four external minisas ports) to pair of d2700s Storage Enclosures. Two ports on the p822 are unused. The partitioning is not at all identical. The top box has four different logical drives and the bottom box is one single drive for…
rjt
  • 578
  • 6
  • 26
0
votes
1 answer

Adding second HP Smart array P420i 0.5GB cache increase speed?

I'm novice with servers, and I apologize for perhaps asking an easy question. I have an HP Proliant ML350p Gen8 server with smart array p420i 500mg Cache. the server has: 2 logical SSD drives in Raid 1 configuration vmWare software virtual machines…
Novice101
  • 1
0
votes
1 answer

HP ProLiant ML310e G8 v2 ssd

I have a HP ProLiant ML310e G8 v2 with Intel® Xeon® E3-1220v3 3.10GHz processor and I'd like to upgrade the storage to a SSD one. Currently I have two Non-SSD hard drives that I've configured RAID 1 and I'd like to create a separate RAID 1 but with…
el.severo
  • 87
  • 1
  • 10
0
votes
1 answer

Replace a physical drive that is part of RAID 1+0

I have a physical hard drive that has a status of imminent failure. It is part of a 4 x 1TB RAID 1+0. The controller is Smart Array B110i SATA RAID in Embedded Slot and the server is HP ML110 G7. I already have a new 1TB HDD for replacement. How do…
F0r3v3r-A-N00b
  • 101
  • 3
0
votes
0 answers

How to install RAID driver for HP ProLiant Microserver Gen 8 after installation of OS

I installed CentOS 7 on my HP ProLiant Microserver Gen8 on a SSD. I'm using the internal SD card slot as boot device while all other partitions are located on my SSD to circumvent the limitations of the storage controller. After days of OS…
Noir
  • 101
  • 2
0
votes
1 answer

HP DL380 G5 - Smart Array P400 - Linux hang with high load randomly

Since 2-3 weeks now, my main server is hanging for no apparent reasons. Was working without issues for more than 4 months in a row before that. Everytime, a simple reboot fix the problem. Current setup : HP DL380 G5, 2 x Xeon 4C 3GHz, 16GB memory,…
Alexandre Lavoie
  • 154
  • 12
1 2 3
…
33 34