Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [hp-smart-array]

"Smart Array" is the name used by Hewlett-Packard's line of enterprise-grade RAID controllers.

498 questions
2
votes
5 answers

Is it possible to replace the SATA CD-ROM to SATA SSD on HP DL360p Gen8?

Can I connect an SDD instead of CD-ROM ? I found Miscellaneous cable kit 671353-001, include Includes the front video adapter cable, embedded SATA cable, Capacitor Pack with 36-inch cable (provides back up power to the FBWC memory module), and…
DCinkaz
  • 29
  • 1
  • 1
  • 2
2
votes
1 answer

ZFS - Solaris 10 doesn't see disks after reboot on HP Pro DL380 G7

The current box has 2 logical drives, shown in P410i Array Controller (F8 during POST) as: Logical Drive 1 - 2 SAS 72GB HD Raid10 <----root pool disk Logical Drive 2 - 4 SAS 146GB HD Raid 5 <----data disk And this is what it shows in the OS…
user355743
  • 21
  • 1
2
votes
3 answers

find out RAID level on HP DL360 server

I have a HP ProLiant DL360 Gen9 server which has three physical 900GB HDDs. Those three HDDs are in some sort of hardware RAID setup. RAID controller is HP 3239 and it uses hpsa driver. For OS it represents itself as a 900GB sda device. Now if I…
Martin
  • 352
  • 3
  • 12
  • 29
2
votes
1 answer

Active/Active MultiPathIO to two HP d2700s?

Our XenServer 6.5 hosts connect over ethernet to shared SAS storage via a single Linux based HP DL360 G6 "bridge". This single StorageServer bridges ethernet to SAS and shares out via an iSCSI daemon. 3x HP DL380 G6 <---> Ethernet<-->HP DL 360 G6…
rjt
  • 578
  • 6
  • 26
2
votes
1 answer

HP DL360 G6 ssd on raid 1 with smart array p410i write verry slow, how to fix it?

I just bought a HP DL360G6 server with a P410i RAID card with 256mb cache. I am using Windows server 2012 I use Intel 520 series 240GB SSDs in raid 1+0, but the speed is very slow. I checked the speed with crystal disk mark: read =450mb /…
pvd276
  • 29
  • 2
2
votes
0 answers

What are the various factors that limits disk read and write speeds and on a network?

How to choose a server which: has high I/O performance of storage is highly flexible in terms of adding more storage So, basically these servers should act as storage servers for OST in lustre architecture. So, in the process of knowing the above,…
GP92
  • 681
  • 2
  • 9
  • 27
2
votes
1 answer

ProLiant SE316M1 + Intel S3500 SSD + Smart Array P410 512MB. Battery (BBWC) needed?

I'm looking to replace our SQL Server: HP Proliant DL360 G4 2x 64-bit Intel Xeon 3.60 GHz, 1M Cache, 800 MHz FSB 4GB RAM DDR2 HP Smart Array 6i 2x 146GB SCSI 15K (RAID 1) With this: HP ProLiant SE316M1 2x Intel Xeon L5520 (8M Cache,…
It1
  • 21
  • 1
2
votes
1 answer

What could be wrong with our HP Proliant Server

While observing our file server yesterday, I witnessed a BSOD, and after a restart, the Server OS (2003) cant boot. We have 6 raid drives. I noticed the disk lights and discovered the first four from the right were giving an amber light. I…
Prince Nnamdi
  • 67
  • 1
  • 6
2
votes
1 answer

HP Smart Array B110i SATA RAID Controller drivers crash HP DL320 G6

I'm trying to install Windows Server 2012R2 on a HP DL320 G6 with a Smart Array B110i SATA RAID Controller. During the install, it asks me to load the driver for the RAID, I load the drivers from cp022401 (also tried cp020545) and the machine…
Guillaume Filion
  • 997
  • 1
  • 10
  • 13
2
votes
2 answers

RAID1 drive not seen by CentOS 7 Installer on HP ProLiant DL360e Gen8

I need to install CentOS 7 on a HP ProLiant DL360e Gen8 server. The RAID1 has been configured in the bios: I have downloaded the driver from…
Wim Deblauwe
  • 143
  • 1
  • 1
  • 8
2
votes
2 answers

HP DL180 G6 - Are 6G/s speeds obtainable?

I have a DL180 G6 server with 12x 2Tb 6G/s SAS drives. I was only getting 3G/s reported. I then went and purchased a P410 controller with 512 Meg cache and battery. I loaded up the drives with Server 2008 R2 and then 2012 R2. The SAS drives are…
Paul L.
  • 21
  • 1
2
votes
1 answer

HP 420i disk controller in Gen8 ProLiant fails to detect third-party disks

I have some fresh out of the box HP Proliant Generation 8 servers which have the HP 420i disk controllers built into the motherboard. Once upon a time the disk controller was a PCI card but now in Gen 8 Proliant it is on the motherboard. Regardless…
user284315
  • 29
  • 1
  • 2
2
votes
1 answer

HP ProLiant - GNU/Linux - Can't find RAID drives

I have a ProLiant DL360 G5. I would like to install Arch Linux onto this machine, but I'm experiencing the following difficulties: I have booted Arch Linux installation CD, but I can't seem to access the hard drives (visibly, there are 6). There is…
lmat - Reinstate Monica
  • 189
  • 2
  • 12
2
votes
2 answers

How do I override grsec?

After a reboot recently, I have a pair of servers that are now unable to monitor their disk status. Nagios reports: HP RAID Array UNKNOWN Error: No controllers detected. -/-/- (LD : []) I get the same error running the check manually on the host.…
jldugger
  • 14,342
  • 20
  • 77
  • 129
2
votes
1 answer

Compatible SATA disks for Proliant ML350 G5 server

I have got a Proliant ML350 G5 server with two SAS drives of 146GB in RAID 1+0, but I would to add two SATA drives of 500GB in another RAID 1+0, but I don't know which are compatible. The measure of the SAS drives are 2.5', I suppose that the SATA…
dlopezgonzalez
  • 185
  • 2
  • 13
1 2 3
…
33 34