Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [electrical-power]

Power is required for all our servers, desktops, and other electronic devices to operate.

Power is required for all our servers, desktops, and other electronic devices to operate.

436 questions
20
votes
1 answer

Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS…
Pro Backup
  • 984
  • 4
  • 15
  • 35
19
votes
4 answers

Plugging in a server rack with UPSes into a room that has its own UPS backup issues

Thank you everyone who's responded. There's been a common theme in some of the responses that I wanted to clarify since I wasn't clear in my original post. This is an upgrade that will replace their current hardware as part of our standard upgrade…
KazeEnji
  • 190
  • 1
  • 7
18
votes
3 answers

Is there a way to protect SSD from corruption due to power loss?

We have a group of consumer terminals that have Linux, a local web server, and PostgreSQL installed. We are getting field reports of machines with problems and upon investigation it seems as if there was a power outage and now there is something…
Yehosef
  • 1,295
  • 2
  • 9
  • 10
18
votes
3 answers

How does a 3-Phase UPS distribute power?

We've got 2 UPSes in our server room. One's 3 phase, and has a 3phase supply, yet the APC network stats thing only says Incoming Voltage: 230.1 Volts The other is a single phase one with no network-type monitoring. What I'd really like to know,…
Tom O'Connor
  • 27,480
  • 10
  • 73
  • 148
18
votes
7 answers

Power loss at company

Property management at my organization has informed me that our building will be losing power for 4 hours tomorrow. I need to be prepared for this event (we're a small organization, i'm young, therefore I am I.T). What sorts of things do I need to…
user8539
17
votes
6 answers

Is it safe to use a UPS designed for desktop PCs to power a server?

I am working on a server within my office. The server will eventually be relocated to a data center. I would like to be able to leave the server switched on in my office, which means I would like to be able to protect it from power outages or…
MrVimes
  • 773
  • 2
  • 14
  • 29
17
votes
4 answers

Can Running a Server's Redundant PSU on Different Circuits Damage It?

So I've been tasked to document and review the status of the UPSes for my current employer and identify any changes that need to be made. Generally easy stuff, however I came across a few units that are plugged into both regular power and a UPS…
Insomnia
  • 507
  • 4
  • 10
17
votes
8 answers

Using Y power cables in a datacenter

I've always assumed that using Y cables from the PDU to redundant PSUs in the same server was totally acceptable practice, however I was recently speaking to someone that said that their colo wouldn't allow it. I'm no electrician, but it would seem…
MDMarra
  • 100,734
  • 32
  • 197
  • 329
17
votes
6 answers

How to wake a server after UPS Shuts it down when Mains power is restored?

I have several Linux servers connected to APC UPSs. They are connected to the UPS via USB and configured to shutdown if the UPS sends a signal that mains power has been lost and has not returned after a period of time. This works well. In addition…
bk.
  • 768
  • 1
  • 4
  • 13
17
votes
14 answers

What is the lifespan of an typical UPS battery?

When using a uninterruptible power supply how long does it preserve the original capacity? Say I buy a UPS that holds the necessary load for 10 minutes - I don't want it to unexpectedly come into state when it dies 30 seconds after a blackout…
sharptooth
  • 2,739
  • 4
  • 32
  • 40
16
votes
1 answer

Get drive power state without waking it up

Is there any way how to determine whether some drive is sleeping without occasionally waking it up? I have tried hdparm -C and smartctl -i but both of them actually wake it up when its already sleeping. I need to set up a script that regularly…
NumberFour
  • 419
  • 2
  • 8
  • 18
15
votes
5 answers

Is there any value in protecting both rack power feeds with their own UPS?

I've done some looking and have not found a satisfactory answer to this question. When is it necessary or suggested to use an independent UPS (on it's own mains branch circuit) for each power feed to a rack? To elaborate; when using servers with…
William S.
  • 328
  • 2
  • 12
15
votes
7 answers

Can I plug a 15A UPS into a 30A receptacle?

I know that typically electronics draw only as much current as they need. Is this the case with UPSs? I have a 120 volt, 30 amp circuit, and am replacing the UPS plugged into that circuit with a lower wattage UPS. This UPS has a 15 amp plug. Is it…
bsamek
  • 329
  • 1
  • 3
  • 7
15
votes
7 answers

How much electricity is required to power 20 'average' computers on a LAN?

i trying to see how much electricity is required to power 'x' number of computers. I know it's a vague thing because some computers draw more than others (eg. diff chipsets, HDD, vid cards, PSU's, etc). So, lets just assume is a mum-and-dad Dell…
Pure.Krome
  • 6,508
  • 18
  • 73
  • 87
14
votes
4 answers

Why do I need a raid battery pack?

I'm trying to understand why one would add a batterypack to a raid card. It seems to me like if power goes down, running just the raid card is going to do little good: without power for HDs and motherboard, writing in-memory data isn't going to work…
user60704
1
2
3
…
29 30