Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [draytek]

53 questions
0
votes
0 answers

No route to host for Gateway on Ubuntu 18.04

I changed my router last night and computers are fine and wireless fine etc. My development web server seemed fine I can access it any my websites and SSH etc however I noticed that I have no internet access. I have a Ubuntu 18.04 instance with a…
harri
  • 185
  • 2
  • 11
0
votes
1 answer

Limiting a station to only LAN access on Vigor DrayTek 2920

How can I configure a Vigor router (2920 in my case, but I suppose it's quite similar across models) to allow a station, defined by fixed IP or MAC address, to only communicate within the LAN and not to the outside web?
GJ.
  • 529
  • 1
  • 7
  • 21
0
votes
0 answers

Draytek Vigor 2820 incorrectly blocking IP address based on keyword filtering

Vigor 2820Vn router (with firmware 3.3.7.8) is blocking IP address URLs with the use of a URL keyword filter. The filter itself is working fine and blocking the URLs based on keyword, but this rule also blocks IP addresses that have nothing to do…
alokoko
  • 121
  • 3
0
votes
2 answers

Windows network share not working over double VPN

Scenario: Server A connected to Draytek router A on subnet 192.168.1.0/24. Server B connected to Draytek router B on subnet 192.168.2.0/24. Site to site VPN between routers A and B. Single Windows domain covering both networks. We then have a…
timanderson
  • 263
  • 1
  • 4
  • 12
0
votes
2 answers

Unable to access OWA from the Internet

I am unable to access my Exchange server from my laptop when outside the LAN using exquilla plugin through Thunderbird. The Exchange server is in the internal network and a NAT rule port forwards traffic to the Exchange server. When I use just the…
marafado88
  • 412
  • 2
  • 9
  • 31
0
votes
0 answers

Blocked DNS Server Requests

We are a group of volunteers for a non profit WISP in the Yorkshire Dales. We have an intermittent but serious spasms of various clients' DNS requests blocked. Note we have only one Internet IP, the 50+ clients are all on fixed IPs served by various…
P.Holmes
  • 1
  • 1
0
votes
0 answers

Draytek Vigor 2830n WAN connection dropouts

For the last two weeks we have been experiencing terrible connections speeds. When running a speed test it normally starts off OK at around 15Mbps but then drops to 0.7Mbs or below making working almost impossible. Nothing has changed on the router…
baileyswalk
  • 115
  • 3
0
votes
0 answers

Cannot find a device attached to network

My work has a wireless alarm system installed, and we recently got a wireless camera to add to it (made by the same company, it simply plug-n-plays). The alarm system uses a small router like device to hook everything up, and that "bridge" device it…
Mr Pablo
  • 101
  • 1
0
votes
2 answers

Draytek Vigor 2860 multiple external IP-addresses

I've bought a DrayTek Vigor 2860 for my company network. And I'd like to use it for two VLANs with separated external IP's. I have 6 LAN ports on my DrayTek. For example: External IP-adres: 201.102.102.104 Internal VLAN: 192.168.1.100 -…
ivodvb
  • 103
  • 1
  • 1
  • 6
0
votes
0 answers

PowerDNS Reverse lookup is not responding in VPN connected network

I created a test network. It is a star VPN network with: - 1 main router - 2 subrouters (DrayTek Vigor 2920) - behind each router a client - behind the main router a PowerDNS machine now the network seems to run perfectly, From one location I can…
BonifatiusK
  • 243
  • 1
  • 4
  • 12
0
votes
0 answers

Can only ping certain IP's over VPN

I have 2 Draytek Vigor 2830's set up with a IPSec VPN between the two which is working. Yet I can only ping the router in HQ (10.0.0.9) & the IPCortex (10.0.0.2), the outline below might help. HQ …
user17736
  • 1
  • 1
0
votes
1 answer

VPN still working after rebooting without client - DrayTek client shows "No Connection"

My home network is a simple router + pc's setup, nothing fancy - the router has DHCP enabled for 192.168.0.X (255.255.255.0) and my PC picks up the address 192.168.0.82. There are no devices on my local lan in the 192.168.1.x range. On my pc i have…
HeavenCore
  • 207
  • 4
  • 11
0
votes
3 answers

Just how slow should my VPN be?

I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a…
David Heggie
  • 222
  • 1
  • 3
  • 14
0
votes
2 answers

Port Forwarding failing only to Ubuntu servers from Draytek router

I know this is a kinda unusal question, but Draytek support (..which is very eager to solve the issue) seems to reach its limits. Scenario: Draytek Vigor Multiwan router with current firmware. Multiple WAN IP Aliases on one of the wan ports DMZ (or…
Rufinus
  • 191
  • 2
  • 9
0
votes
0 answers

Tagged VLAN not working on TP Link TL-SG1016PE

Draytek AP 960CTP Link SwitchesHPE SwitchDrayTek 2866enter image description hereenter image description hereI have created an additional VLAN upon my company network, configured exactly the same as VLAN's already in place. However this new VLAN…
Chimera_t
  • 1
  • 1
1 2
3
4