Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [cisco-catalyst]

A brand of network switches by Cisco Systems.

113 questions
1
vote
1 answer

Can mod_fcgid maintain a hard-minimum number of available appserver processes?

...and if so, how? I'm using Apache2 + mod_fcgid to serve a perl Catalyst application, on a box that I own, and I'd like for mod_fcgid to maintain a minimum number of spun-up processes ready to go. The docs say that FcgidMinProcessesPerClass only…
dsadinoff
  • 265
  • 3
  • 9
1
vote
2 answers

Vlan Management Policy Server ( VMPS) Configuration and Management

I am trying to design a topology in which I need to use VMPS and unfortunately the resources are rather few on the internet. Based on this Configuration document VMPS I have created a sample configuration document. However I see in it a particular…
gokul varma nk
  • 67
  • 2
  • 15
1
vote
1 answer

Etherchannel between Cisco Catalyst 3548 and Linux box

We have a Cisco 3548XL switch. Fa0/1 and Fa0/2 are configured with the: port group 1 option. This gives me this: switch#show etherchannel summary Flags: d - default D - down I - in use Group Ports -----…
Squeeb
  • 172
  • 1
  • 13
1
vote
1 answer

Cisco BPDUGUARD and BDPUFILTER

What happen if I have both ENABLED spanning-tree BPDUFILTER and BPBDUGUARD on a specific port?
Andre
  • 1,341
  • 4
  • 19
  • 34
1
vote
4 answers

CISCO 3550 HW Crash

were facing 5 Cisco CAT 3550 crashes now, we send out configuration to 3rd party company CISCO Gold partner and did environment power checking with the server site, no clue as yet what would be the cause of these crashes. The password-recovery…
Syed
  • 69
  • 1
  • 2
  • 11
1
vote
2 answers

Management VLAN Cisco Catalyst

I have configured a couple of VLANs on a Cisco Catalyst switch with IOS, i will put all the ports that clients is connected to, into these VLANs. I want to configure the native VLAN [vlan 1] as management VLAN so i can use a telnet client to connect…
cha789
1
vote
0 answers

Configuring multiple DHCP address pools between two Cisco 2960 switches

I have two Cisco 2960 switches, connected by a trunk, with all ports on VLAN1. I've setup one switch to have DHCP Server Port-Based Address Allocation, such that a client connected to port X always gets the same address. I'd like to setup the…
stratocaster_master
  • 11
  • 1
0
votes
1 answer

Unable to ping some switches

I have this situation: all switches have the same vtp domain; vtp is either transparent or on off mode; SW5 is the root bridge; all switches are visible when i execute "sh cdp neighbors"; the ping is not successful between SW1 and the 3 switches…
AthmaneDZ
  • 1
0
votes
0 answers

Cisco Catalyst - plugging in a switch on an access port take down a far-away port channel

I have made a diagram at this pastebin - basically i have a production network with a pair of 6840 as my core (VSS), it has port channels to various systems. I do not use any routing protocols, VTP is set transparant across the board, and rapid…
Stokkeland
  • 88
  • 7
0
votes
1 answer

cisco 4948 IGMP flooding on all ports

everyone Having trouble with multicast on cisco WS-C4948-10GE (MPC8540). I have two switches running: System image file is "bootflash:cat4000-i5k91s-mz.122-25.EWA9.bin" and System image file is "bootflash:cat4500-entservicesk9-mz.122-46.SG.bin" Both…
Tomato
  • 79
  • 1
  • 8
0
votes
1 answer

Can't ping outside IP address

Our firewall is Cisco ASA and our switch catalyst 2960. One computer keeps having the following problem : Once for a while (in one or two days), the computer can't ping outside IP address like 4.2.2.2 and 8.8.8.8. The computer can ping inside…
chicagotech
  • 3
  • 1
  • 6
0
votes
4 answers

Cisco native port has to be included in allowed vlans of trunk

I have wireless access points that have a single ethernet interface. On this interface it has a management IP address (untagged), and can create multiple SSIDs each of which can be bridged on to its own VLAN. As i understand, this is a form of…
morleyc
  • 1,150
  • 13
  • 47
  • 89
0
votes
1 answer

Pause input counters incrementing when imaging a device through USB NIC

We keep running into issues with trying to image devices using a usb-e1000 NIC. It will get the OS on there, but then once that happens the "pause input" counter on the switch begins to increment and the imaging job fails out. This is when using a…
AaronS
  • 23
  • 1
  • 4
0
votes
1 answer

Guest WiFi using isolated VLAN - Cisco routing

I am attempting to setup a test environment for a guest WiFi network. My aim is to use a separate SSID on a completely different subnet and keep it totally isolated from the management subnet. So far, I have a Cisco Aironet 1602 broadcasting two…
Becky
  • 41
  • 1
  • 8
0
votes
2 answers

"route" sub-command does not exits in "ip" command on Cisco 2960-S

I am new to cisco. I'm running a Cisco 2960-S and defined several VLAN on it. I like to use SVI feature and set 192.168.1.254 ip address for interface VLAN 1, 192.168.2.254 for interface VLAN 2 and so on, but I can not ping 192.168.X.254 from the…
IAmAliYousefi
  • 101
  • 3
1 2 3 4
5
6 7 8