Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [blade-server]

137 questions
0
votes
0 answers

How to get VmList from CiscoUCS?

We are using XML API to connect CiscoUCS Manager and get all the hardware components. We are in the requirement of getting all the VM deployed in the bladeServer. But not able to find these information in the Cisco UCS Manager. Can anyone help me…
Guest
  • 1
0
votes
3 answers

How Reliable is Virtualization when compared to dedicated Hardware?

In my organisation we have plenty of mission critical servers and currently there is a debate whether for critical servers we should use VMWare vSphere 5 or have a dedicated hardware? The perception from senior management and the developers, some…
Andre
  • 1,341
  • 4
  • 19
  • 34
0
votes
1 answer

Problems with IBM BladeCenter E type 8677

We have an IBM BladeCenter E server with three blades, today I've tried to manage it through telnet, after logout it does not respond on its default "Management Module" address (it was set to 10.0.150.10, normally I've accessed it through web…
Mark Zakred
  • 73
  • 3
  • 8
0
votes
2 answers

IBM DS3512 Connection to IBM HS22 BladeCenter

I have a BladeCenter HS22 with 14 bladeservers. Attached to the BladeCenter I have a DS3512 storage array. I'm trying to access the DS3512 to configure it but can't manage to do it. I have connected to the two SAS modules IPs via the IBM Storage…
GreyTek
  • 1
  • 3
0
votes
2 answers

Match logical and physical network interface names

Our company planned to move their hundreds of servers (virtual and physical) to a brand new datacenter infrastructure. First, we have created a spreadsheet which lists the configuration of all the links and between servers and networks equipements,…
hello31
  • 9
  • 1
0
votes
1 answer

How to flash - Management Blade MMB S3 - Fujitsu

I have a BX600 and I need to know how to flash the MMB S3. I have no IP access to the device and I think that there has been an issue with the transfer using TFTPD32 to upgrade the MMB S3. I have checked the manual and there is nothing about…
Arthor
  • 195
  • 4
  • 18
0
votes
1 answer

Fujitsu BX600 S3 with 10 x BX620 S4 Blade Servers + QNAP TS-EC1279U-RP --- SETUP

I have the following hardware: Fujitsu BX600 S3 Chassis 10 x BX620 S4 Blade Servers QNAP TS-EC1279U-RP APC Symmetra RM 6kVA 6000VA SYH2K6RMI HP PROCURVE 2510G (J9280A) What I would like to do: Use the above for VMWARE Partial rendering Video…
Arthor
  • 195
  • 4
  • 18
0
votes
1 answer

IBM HS22 Blade loses connectivity intermittently

My IBM HS22 Blade loses connectivity intermittently. It happens randomly every few hours and lasts just a few minutes. The connection is restored without any action taken. Problem is very similar to this one except that I have an HS22 blade running…
Adil
  • 1
  • 1
0
votes
1 answer

How to route, using Linux, from nested private subnets to internet

In our departement we have a blade system with one master node and four slave nodes that are connected to the master node. The system uses its own subnet (192.168.1.x) and only the master node is connected to the intranet (and thereby to the…
medihack
  • 145
  • 1
  • 1
  • 6
0
votes
1 answer

linux + Backup & Restore tool for Blade IBM/HP machines

target - Backup & restore tool that can be put on a PXE server so that a client can be booted via network and support IBM/HP blade machines I hope that I ask the right question, there are allot of backup & restore tools so I little confused and I…
yael
  • 2,433
  • 5
  • 31
  • 43
0
votes
2 answers

Remote RIB iLO on Proliant via RIBCL

I'm trying to automate a process for our Ops. The process requires that some windows servers running on blades are shut down, left down for a few hours, the restarted when some other processes complete. This is done by an op logging on to each…
Wudang
  • 163
  • 7
0
votes
3 answers

IBM BladeCenter E with 3000W step up transformer from 120v to 240v

OK so Im looking to run a IBM BladeCenter E chassis. It requires 240v at 12amp running 1800w. I want to know if i can run it off one or two 3000W step up transformers like:…
Tim P.
  • 103
  • 2
0
votes
2 answers

How reliable is CentOS 5.x RAID 1? I'm considering the SuperMicro MicroCloud product which has everything i need except for hardware RAID

The SuperMicro 3U blade server looks very promising - MicroCloud! If i configure RAID 1 on the 2 SATA drives in each of the blades, how would that work out in terms of reliability? Compared to 8 1U servers with hardware RAID, the price difference…
andy318
  • 113
  • 2
0
votes
1 answer

Can I reset an HP p-class enhanced blade chassis iLO to defaults manually?

I just came into possession of a p-class HP BladeSystem enhanced chassis with eight BL25p blades and two CGESM interconnects. I didn't get a SUVI cable so I can't interact wit the blades directly. I don't know what the chassis iLO ip address or…
Martytoof
  • 135
  • 1
  • 6
0
votes
4 answers

Blade vs RackMount

In which cases do you think that a Blade is better than a rackmount, in a virtualization environment? If you think that blades are much better than Rack, then why facebook prefers rackmount?
Mascarpone
  • 872
  • 3
  • 9
  • 28
1 2 3
…
9 10