Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [access-point]

184 questions
1
vote
2 answers

Multiple 1200 Aironets - Random shutdowns, including serial console

I have over 20 1200 series PoE Aironets in a large building, using multiple vlans + WPA. Starting about 6 weeks ago, random waps will just stop responding to ping, ssh, http, and stops serving clients--I have connected via serial, and I dont get…
Josh Brower
  • 1,669
  • 3
  • 18
  • 29
1
vote
1 answer

How do I setup dynamic VLAN assignment on an autonomous Cisco 1142n?

I've gotten my Cisco 1142n autonomous AP configured with every option under the sun, but I still can't get dynamic VLAN assignment working! I verified the following: I give priority to VLAN assignment via RADIUS with aaa authorization network…
gooddelta
  • 11
  • 3
1
vote
3 answers

Connect Wireless and Wired network

What is the best solution to connect a wireless to a wired network, so that both get their IP from one DHCP server and can communicate with each other as if they were the same network? The wireless access point is a Debian box with a prism54…
JeanMarieStaub
  • 113
  • 3
1
vote
1 answer

Looking for a pci wireless card for a ubuntu-based access point. Any recommendations?

I have recently been trying to setup a wireless access point on a small ubuntu server, but the wifi card doesn't seem to be compatible. Its a Dlink DWA-552, which I was hoping would work, but the chipset doesn't seem to support what I'm trying to…
ks78
  • 849
  • 2
  • 10
  • 20
1
vote
1 answer

How can I determine which house is originating a WiFi signal?

A buddy of mine used to make money by going to houses that had unsecured wireless networks, explaining the risks, and charging them $25 to turn on encryption. The hardest part is figuring out which house belongs to a particular network. He said he…
Trevor
  • 39
  • 2
1
vote
1 answer

HP/3com 9552 802.11n AP won't let some clients connect

I splurged and bought an HP/3com 9552 802.11a/b/g/n access point. Like most enterprise-grade access points, it has very fine-grained configuration options. I'm pretty sure I've configured it correctly for WPA/WPA2 with CCMP/TKIP encryption using a…
Barry Brown
  • 2,472
  • 5
  • 23
  • 23
1
vote
2 answers

config a router to act as a client and access another wireless router/network, wag120n

I currently have a WAG120N( http://www.linksysbycisco.com/EU/en/support/WAG120N) router and I would like to know if it's possible to configure it to connect to a different wireless network(WEP with no password) so I can get internet access on it and…
mihai
  • 21
  • 1
  • 2
1
vote
2 answers

Cisco Aironet (802.11n models): how to put a WEP128 ssid and a WPA/WPA2 ssid on the same radio?

I'm using a Cisco AIR-1252AG (IOS 12.4(10b)JDA3) and I must provide both a WEP128 wlan (for compatibility with older embedded devices, this will go to a firewalled vlan) and a WPA2 (WPA1 would be ok too) wlan on the same 2.4GHz radio. Both with pre…
Luke404
  • 5,826
  • 4
  • 47
  • 58
1
vote
0 answers

Disassociated WLAN (Disassociated due to inactivity)

I am reading the logs provided by an access point I have broadcasting an 802.11i (WPA) LAN network running with a radius authentication method, and the log returns the following two messages: Aug 31 10:09:54 10.100.1.78 CONN-LOGIN_INFO: [WLAN-1]…
user3105
  • 129
  • 1
  • 6
1
vote
2 answers

Connecting to Multiple cameras which each acts as a WiFi Access Point

I have 7 cameras each acting as a WiFi Access Points and I can not change their configurations. Camera1 SSID: camera1, pass: 1234, it has static IP: 192.168.42.1 and built-in DHCP server Camera2 SSID: camera2, pass: 1234, it has static IP:…
Mehmet Fide
  • 123
  • 5
0
votes
2 answers

Can i have multiple AP's of different network on same Unifi Controller?

I have multiple AP's in a big building. But on each floor i run different network for example APn have 192.168.22.n and APz have 192.168.23.z. Can i have all those AP on one unifi controller. It would be a big headache if i have to control each…
Hyp3rActiv3
  • 1
  • 2
0
votes
1 answer

Can't connect to access point because of iptables/filter

Setup Raspberry Pi connected to router using ethernet on subnet 192.168.0.0/24 Raspberry pi access point on subnet 192.168.43.0/24 I am using the nordvpn application and when I connect to the vpn it applies a filter on my network: Problem After this…
Sap
  • 43
  • 1
  • 8
0
votes
1 answer

MikroTik EAP-TLS WiFi Config using Certificates

What are the upsides and downsides of using EAP-TLS authentication with certificates for WiFi client connections? How is this superior than just using standard WPA2 password authentication? How do I configure EAP-TLS authentication for an MikroTik…
F1Linux
  • 355
  • 5
  • 12
0
votes
2 answers

Activate license on cisco wireless controller

I have a Cisco Model 2504 wireless controller. I currently have 7 access points using the controller. I have purchased a new wireless access point, model AIR-CAP3702I-A-K9. I purchased a license to add the controller. I added the license using the…
jimboweb
  • 129
  • 1
  • 6
0
votes
1 answer

What's a simple method for conducting a manual scan for rogue ap detection?

We have a PCI requirement to conduct scans for rogue/unauthorized WAPs quarterly. Below are the properties I'm looking for. Simple to conduct. We have a satellite office, in addition to our main office, so we need something simple enough to be…
sjl
  • 21
  • 1
1 2 3
…
12 13