Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [access-point]

184 questions
1
vote
3 answers

Average Clients Simultaneously Accessing a WAP?

We have two (sometimes three in that area) mobile carts of ~20 MacBooks accessing the network using Cisco Access Points, the model numbers of which I don't have handy at the moment. But we're trying to track down issues with timeouts and access…
Bart Silverstrim
  • 31,172
  • 9
  • 67
  • 87
1
vote
1 answer

Ubiquity Powerstation radio switch port not working

Is there a way i can still connect to my Ubiquity Powerstation 5 Radio that the ethernet switch port is not working with my Laptop. When connected to the PoE, it powered up and the WAN light indicator comes up after some time but when connected to a…
Omobulejo Abiodun
  • 11
  • 1
1
vote
1 answer

HP Radio Port 210 web configuration

We acquired used WiFi system to provide better wlan for the customers in our hostel. The switch is HP PROCURVE 5406zl and we have 50 or so HP PROCURVE RADIO PORT 210 access points. I set up the switch and connected a few ap's; pfSense DHCP gives IPs…
J. Tamminen
  • 11
  • 3
1
vote
1 answer

What network/device info can be obtained from an iOS device connected to an 802.11u-enabled access point?

In order to perform some device security validations, I need canonical references to what device/hardware/network information can be obtained from an iOS device connected to an 802.11u-enabled access point. There are of course your typical network…
brandonscript
  • 119
  • 4
1
vote
0 answers

Public wifi & range extender + additional access point

I have a problem setting up a RE in client mode. If i use the "universal repeater" mode, the RE can successfully connect to the public wifi network and when I try to browse to some site, the first page I get is the public wifi's login page. Now, I…
guest
  • 11
  • 1
1
vote
1 answer

CISCO Aironet 1140 not responding after updating duplex settings

I update the duplex mode/speed settings for my CISCO aironet 1140 AP from Auto/Auto to Full/1000. It is now not responding to ping or connecting via URL. I am trying to get it back to Auto/Auto so that it works. Any suggestions? This url shows the…
Greg
  • 73
  • 1
  • 1
  • 7
1
vote
1 answer

Download Cisco Lightweight AP Image

I currently have a Cisco WLC 2112 and several 1242 lightweight AP's. Is there any way I can download the IOS image either from the AP's themselves or through the controller?
hfranco
  • 585
  • 2
  • 9
  • 25
1
vote
1 answer

How does static ip work among a few access points?

I have a modem that is connected to a main router. This main router is then connected to a few access points which in turn connect to a bunch of computers either wired or wirelessly. Questions: Do I need to set static IP for each AP? Why and how?…
rabbid
  • 153
  • 1
  • 2
  • 7
1
vote
1 answer

How to setup a guest network?

i've a some Cisco WAP2000 access point. These are used to allow our employee and our warehouse to connect to out network. I would like to allow guest's to connect but for using only internet, with no limitations, and hide our disks, printers etc..…
stighy
  • 931
  • 8
  • 21
  • 32
1
vote
4 answers

Cisco Aironet 1200 Series AP Configuration

I am attempting to configure a new CISCO Aironet 1200 Series Access Point to have a fixed IP. I have been searching online and I have come to the conclusion that the default IP address of this device is 10.0.0.1. These are the steps I have…
nonterrorist
  • 121
  • 1
  • 6
1
vote
1 answer

PoE switch to power Cisco Aironet 1200 access points

I have a draytek P2260 poe switch which can provide up to 15.4 watt of power to devices like IP phones. This switch is a 24-ports 802.3af PoE PSE However Cisco Aironet AP require 18.5 watts and at the moment they are powered through an…
Ravi
  • 115
  • 2
  • 8
1
vote
1 answer

configuring cisco wireless access point via snmp

Is it possible to configure Cisco aironet access points via SNMP? For example for basic functionalities such as; setting SSID setting authentication method creating VLANs Regards,
seaquest
  • 698
  • 2
  • 12
  • 25
1
vote
2 answers

Wireless network with 6 routers

I have 5 internal Wi-Fi routers (DrayTek Vigor2110n). These routers are intended to supply Internet connectivity for visitors of the site within the open area, without aloowing access to the internal network. (Please refer to the below diagram.) The…
kuzulio
1
vote
1 answer

Packets being dropped by iptables

I am trying to create a Software Access Point in linux. I followed the blog here. Steps I performed: Started dhcp server on wlan0. Properly configured hostapd.conf Enabled packet forwarding & masquerading. Two commands executed regarding…
Abhijeet Rastogi
  • 236
  • 3
  • 20
1
vote
1 answer

Cisco 881w - AP dropping clients non-stop

I have a Cisco 881w, and some clients are connected on the AP (wifi). Today, the AP was dropping clients under the reason "reached max retries". Then when I reloaded the AP, everything was back to normal. Here is a screenshot of the issue:…
Jonathan Rioux
  • 1,938
  • 6
  • 33
  • 57
1 2 3
…
12 13